Search results

I have a free, working 24v starter with bracket for the taking. Just pay postage. choll40@gmail.com. First email gets it. Moving to Dominican Republic so stay tuned for more free stuff. Chuck

My hi/low beam switch went bad stuck on high bean, naturally, does anyone have any wiz bang way to replace it or should I just follow the TM.

My 09 was running in the drive way warming up and it shut off like I turned the key. Now I have nothing working. no alt lights, no dash lights at all. Just spent about 4 hours looking at the sight but couldnt find anything. I have voltage coming into the starter relay(red Wire)

Sorry to have to post this but between my wife in the hospital, work and dropping my daughter at school I dont have time to figure this out. This morning after starting my 09 it just shut off, like I turned off the key. No instrument panel lights when I turn the key no voltage reading on the...

This must be my week broke down on the road 3 days ago, found a starter and put it in and made it home. Now I have a leak in the transmission lines that run under the transmission. Does anyone have a part number for them. I tried napa etc no one has them. Chuck

I have a chance to get about 3000 gallons of hydro fluid for free 50% new 50% drained from a sealed system back into the drums. Can I use this as a 50-50 mixture in my 1009. I know WMO can be but not sure on the hydro fluidChuck

Having trouble finding out why my 09 wont start, I already posted it yesterday, I have a remoted starter switch hand held. I only used it on my jeep a few years ago. I want to save myself crawling under the truck a few times so my question is, What do I hook the 2 alligator clips to, ground...

I just had a no start situation with my 09. I turn key and I get nothing. I get a click from the relay, picture behind dash next to ash tray, check the fuses all are good. I was going to drive this on vacation tomorrow, hoping someone can give me a quick fix. I did have a spare relay that I...

Well did another 800 mile round trip to Cali yesterday. This 09 never stops amazing me. The only thing that concerned me was the outside temp it was about 102 degrees and the first part of the trip was long uphill grades, 15 miles. This is the first truck that I havent put in a gauge that I...

Before I get blasted for the question I did look at the TM but am lost a little. I found the thermal feed for the glow plugs on the diagram, my confusion is it the one with the two wires near the fire wall or one a little further back and down closer to the fire wall with the one wire. Im...

Wellthe blazer did another pickup this week. I picked up my CJ10A that had been in storage in Palm Springs CA. No issues at all going was a little slow going over the mountainfrom Baker Ca to Vegas but the Blazer did well. I half expected to have to stop half way up the mountain, it a 20 mile up...

Well my contract is up in gary indiana, thank god, Im heading home to my 4 year old and wife in Las Vegas. Im driving my 1009 its loaded I checked all fluids and belts. I have spares of most common parts and tools to fix them. Im heading to Memphis Tn to get pics of the Memphis Belle then...

I am currently working on my 9th cucv. This unit has a oil leak from the head gasket on the drivers side. I have put approx 6000 miles on it since I got it running last Sept. there is no water leaking into the oil and no oil getting into the water. I can see where the leak is just above...

Any one have a way of replacing the low/high beam switch without taking the whole steering wheel apart. Mine are stuck in high beam. I adjusted them down a little so Im not blinding everyone

What temp should I start worring about diesel fuel starting to gell. Im in the chicago area but from vegas and never had to worry about this. Going to the store now to buy some additive now.

Im having an issue with my fan on/off speed control. The blower works. When I had the dash pad off for replacement I thought I had it fixed. Well it stopped working today. Does any one know of a quick by pass so I can get air blowing to clear my windshield. When I had the pad off I thought...

Any members in the Chicago, Indy area that want to meet for coffee or lunch.

I just bought a block heater, NAPA # 6053180, the instructions say to face the heating element at 6 oclock. Which way is 6oclock facing the front of the truck or the rear.

So I just ordered a 600 watt freeze plug block heater. Anyone have experience removing the freeze plug? What should I expect? Should I drain the anti freeze or will I just loose a little bit as I put in the heater. Seems straight forward but I am jumping into an area that I know nothing...

Trying to work on my truck while out of town and dont have access to a computer all the time. Trying to get info on my iphone during the day. Can some one take a picture of the temp sensor and post it for me. trying to get info from the TM on the phone is nuts Chuck