Search results

Need a set mirrors for my M35A2C - Seen 3 or 4 different types - Any suggestions on a source for 2 complete sets? Thanks

After replacing the fuel tank/pump/filters on my 89' M35A2C (it fell pray to old gov biodiesel) we thought that it might start again (ran great when first bought). Flip the power switch - pump humms - no fuel at the injector pump. I know the pump works since it came off a running duce (engine...

Have a question about the primer pump next to the filters on the MK48 - When you pump the primer it blows bubbles in the fuel filter bowl - Theres no real pressure on the pump as you work it. The reason for trying to use the primer pump is the engine wont start - it ran fine when it was...

Heres a couple pics of the gen set I picked up from a friend - I decent shape considering its age. Hope to get it running soon - any suggestions on the best way to clean the fuel tank - its kinda crusty.

Just bought one of the Mk48 LVS trucks in Jacksonville - will the 8V92TA operate with a wmo/diesel mix? If so any experience with the mixing ratio? Thanks

Any suggestions on replacement mule wheel nuts - do I use a washer and nut? or just the nut alone?

I have a 89 M35A2C - ran great when I bought it - then it stopped starting. We pulled the in tank pump out and it was nasty dirty - the pump was stuck. Kinda reminded me of the hyster mil forklift we bought were they used biodiesel and it seperated into pudding - this truck came from the same...

Looking for a source for a GM 6.5 liter turbo injector pump?

Taking a trip out west with the family - going to hit all the major national parks and such along the way. Just wanted to know if theres any military related points of interest along the way...... Starting in Albuquerque NM heading north to Durango CO riding the train to Silverton - From there...

Being a Mule newbe I thought I would consult with the experts :-) It recently started taking longer to start to now where it wont start at all. Today it did start and ran for a minute or so then backfired and died. I checked both plugs for spark and both sides will only spark for the first 2 to...

The fuel pump on my M35 stopped pumping - still made noise like it was working but no fuel output. Removed the pump to find the pump unit was frozen up - more like gunked up. After removing the lower part of the pump and washing it down with some MEK it finally freed up. We reinstalled the pump...

Both my M416 and M116 trailers surge brake shocker absorbers are worn out. Need a source for replacement shocks absorbers - any hints.

I just bought a Hyster forklift powered by a Isuzu diesel from the govt.(scl - The lift has a sticker above the fuel cap that reads Biodiesel. Now heres the question. Does the biodels go bad, when it does go bad does it look like fudge? Anyone have one of these engines?

Need the drivers side top A-Arm assembly - NOS or used will work fine.

Are there any MV related yards in the area of Burlington CO ? Will be attending the Cheyenne Wells MG shoot in May.

Going to be spraying Gillespie paint soon - how much should it be reduced?

Have a 89 M35A2C that I bought a year ago October - It has always started in the first few turns of the starter. Last time I went to start it up it stumbled like it was going to fire up then nothing. I dont use it on a regular basis so it sits for periods between starts. Cranks fine - just...

Today the title gods bestowed a FL title to my mail box - its been in the works since November with GL :-) No excuse now to get the M35 on the road.

Picked up today this 1998 M151A2 Encore - These were built with M151A2 running gear, engine, ect. assembled on a new body. Runs great just been sitting outside for a couple years. Soon to be painted Desert Tan. I used to work for Encore in 97 - 98 as a buyer before they want belly up...

I am ready to send the paperwork off to GL for the form 97 but I still need to come up with a year of manufacture. This is what I have to work with ID # 1040 - 11507 Contract # DAAE07 - 85 - C - J047 USAF 89K 398 Warranty date 5-89 Anyone want to take a shot at it? Mr. Doyle said that the...