Search results

Headed down some time in the next few weeks to pickup a Hemtt. Waiting for an EUC to clear.

Would like to have someone pickup / store my tractor until I can figure out what I'm doing with it. Here is the unit.

You can only tighten the compression fittings so much, and after putting a wrecker CTIS controller in my trucktor, it only made the problem worse. Here is my fix. One bolt, one nut to adjust the pressure on the cover, another to lock it in place, and some washers sandwiched in-between. Pretty...

Picked up a set of hemtt wheels and 1600 michelins for the 916, but have a few questions before I can get the tires / wheels mounted up. 1) What are the correct valve stems to run? Looks like there are two styles of hemtt valve stems. An old one with two valve cores, and a newer one with a...

If you carry a tow bar with the truck (you should if you don't) here is a clever place to put it. Does not collect water, easy on, easy off, and is well secured using two ratcheting tie-downs. All our trucks have them there. Easy to lock if you want, and just keep the feet with pins in a...

I've hit a bit of a wall. Got 5 flashing lights on my CTIS, and after tracking down all the leaks (there were a few) the system still defaults once the system runs its first pressure check, and tries to inflate. What I'm experiencing is the following: When the system cycles on, the pneumatic...

Racked up a bunch of miles on my 923a2 converted into a 931 over the last year, but recently have ran into some issues with the air system. Started off with a bad head gasket that I replaced, and a thousand miles later it looked like this: Fixed that, but had it fail two more times since...

Headed to Nellis next week to pickup a truck and would like to trailer it home. GL says no loading ramp, nor do they know of one. Any one know of a place nearby?