• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Search results

  1. R

    Mep803a wiring to home panel questions?

    Can you point me to the kits offered?
  2. R

    Mep803a wiring to home panel questions?

    Its going to be a stand alone MEP-802A that is the whole house standby generator.
  3. R

    Mep803a wiring to home panel questions?

    What are some sources to get an automatic transfer switch? If I'm reading correctly the Ronk is still a manual switch of some kind. Please correct me if that's wrong.
  4. R

    MEP-802A questions

    Yes!
  5. R

    MEP-802A questions

    Thanks! Only have a little time everyday to work on this thing. Appreciate your and everyone else's replies.
  6. R

    MEP-802A questions

    Found it. Thanks! Question is the nut used to drain the radiator in the photo? It should be closed fully when the radiator is filled with fluid correct?
  7. R

    MEP-802A questions

    Sort of yes. This is what I'm working with now. What I mean by the 't' is this little thing right here. The extra hose was connected but it doesn't look like it should go anywhere. I think I can weld this opening shut and call it a day. But just wanted to check to make sure I'm not over looking...
  8. R

    MEP-802A questions

    Just to confirm there should be one drain down at the bottom? Mine seems to have an extra 't' that I need to cover so the overflow does not escape inside on the floor.
  9. R

    MEP-802A questions

    Thank you!
  10. R

    MEP-802A questions

    Found it. Thanks!
  11. R

    MEP-802A questions

    Alright I need some assistance with the hookup for the radiator and coolant reservoir. Fixed the broken tip close up photo. That is where the plastic tip was logged into. The longer hose was attached. Where does it connect to if not directly above to where the radiator cap is located. What does...
  12. R

    MEP-802A questions

    Just about ready to connect the batteries. Does anyone have a diagram or can show with pictures how this is supposed to look like?
  13. R

    MEP-802A questions

    Thank you!
  14. R

    MEP-802A questions

    I can't seem to find in the TM how much coolant the generator takes? Does anyone have a quick answer? It was drained at the depot and its empty.
  15. R

    MEP-802A questions

    What is the best place to source hardware? The screws that holds all of the pieces of sheet metal together. Ended up taking it apart (fix the cosmetic issues) and I'd like to replace the screws that need replacing.
  16. R

    MEP-802A questions

    What do you guys do to allow the fuel filter to have the drain so the water is able to separate when using the 33472 fuel filter? Is this hose really necessary?
  17. R

    MEP-802A questions

    Thanks for the responses! Found a free oil tank and will be picking it up.
  18. R

    MEP-802A questions

    Wanted to ask about the fuel you all are putting in your generator? Are you able to source the cheaper fuel oil vs the diesel from the gas station? Just about finished cleaning the interior of the fuel tank.
  19. R

    MEP-802A questions

    For sure. Next time I will.
  20. R

    MEP-802A questions

    Yes, GMG. Thanks
Top