Search results

If a 5 ton has a multifuel engine in it does the make of the engine matter are all parts interchangable regardless of manufacturer? Say for injector pumps all same, same?? James G.

Different Combo I tool a dozen or so shots of different combos of tracks and trailers and specialty trucks with trailers on flat beds this one of the more interesting combos. James G.

Rail Yard Here is Ft. Riley Kansas where alot of them are loaded and unloaded. They have a huge rail yard on the base. James G

Junk yard is the cheapest way to go. Memphis equipment if you want it nos. James G.

RE: Bumper - What are these holes for???? The holes look like they came in the bumper, not add-ons. The two small holes in the lip of the bumper(center) look like something was mounted there? James G.

I think you use the holes already in the back of the cab, their should be two vertical rails on the back of the cab for the post to lay in. James G.

I called Hagerty on my M543 they were going to charge me $113 a year for full coverage with a milage limit of 800 miles, until they found out it was not fully restored and was not stored inside. After that little disclosure they were not interested. James G.

RE: Bumper - What are these holes for???? These would not be for hanging the wiffletree on would they, I have seen some of the WWII wreckers with wiffletrees mounted on the bumper. Does anyone with a M543 have these holes in you bumper?? James G.

RE: Bumper - What are these holes for???? These would not be for hanging the wiffletree on would they, I have seen some of the WWII wreckers with wiffletrees mounted on the bumper. Does anyone with a M543 have these holes in you bumper?? James G.

I am adding a step to the 543's bumper, I have noticed two sets of holes straddling the frame horns, they are about 1/2 inch. in diameter and 13.5 inches apart on both sides of the bumper. There is also a set of 1/4 inch holes centered over the winch cutout on the top and bottom lip of the...

I was looking at the M543's engine tag. It has a rebuild tag stamped rebuilt by MMD,92/2/7. There is no manufacturers name on the engine tag. Is the manufacturers name cast anywhere on the motor? And what/where is MMD? THanks, James G.

RE: Re: RE: batteries I am headed up to Ft. Riley, in a week or so to pick up my two Wire Rope Kits. Lawrence KS is on the way and while there I am going to pick up at least a couple of 6TL Blems at the factory, $40 each I hope. If anyone near by needs a set let me know, my Honda Wagon(28...

What I need is the clevis with two pins in it the 3/4 and 1 inch, like the one shown in the towbar manual. I tried the one I have on my M37, it is too large to go though the shackel mount. James G.

Thanks, M1075, are you in Easten or Western Oklahoma? I am in NW Arkansas, one of these days we should have a get together in some central location, for everyone in the area. James G.

I thought the two slinder bolts with D pins attached were for my med. towbar to hold the legs in place but they are too large. I have one towbar "foot" the brown singel part in the center of the photo, does anyone have it's mate for sale? One is not much good! James G.

M1075: Can you post the back side of the center set of adapters, I think I may have just recieved a set of those but it is hard to tell from the angle. Are they for the M880? Thanks, James G.

My parents have run up on a 5 Ton wrecker near their home in Mississippi. They know the owner so one of my brothers went over to look at it. He said it looks just like mine, and they are both green, he is not much for details. Anyway my dad mentioned I was getting some chain clamps for my...

RE: compression I can't find a compression release anywhere on the genset. It has a on/off switch, run lever and a stop lever and that is about all, it is a very small and simple piece of equipment, but I still can't get it started!!!!!! Jones I will send you my address tonight or do you...

Too much black, see how well it blends in with it surroundings!!!!!! James G.

RE: compression Someone on the forum earlier called it a MEP 13, I don't know if this is right or not? It has a Wisconsin-Robin 6 hp single cylinder diesel motor running a 3.1KW generator. The red cap covers a tube used to add fuel to prime the engine. Any help is appreciated. James G.