• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Search results

  1. 212sparky

    SS response time on the net...?

    Give you provider a day then call. They may be working on a switch site and overloading the circuts that in turn slows the speed down.
  2. 212sparky

    2012 Fall Haspin Rally 2

    I have not. I don't have any contact information for him.
  3. 212sparky

    2012 Fall Haspin Rally 2

    Nick, Have you called about the port-o-let for the event?
  4. 212sparky

    Hello from Butler Pa

    Welcome to the nut house and enjoy. :beer:
  5. 212sparky

    2012 Fall Haspin Rally 2

    I plan to be rolling in around noon of the 19th and setting up camp. Hopefully it wont be a dust bowl this time.
  6. 212sparky

    New light switch

    Push buttons have their issues as well with burning up.
  7. 212sparky

    Whats up with my deuce's wipers ?

    I replaced the plastic ones with metal. No issues since. I also put a valve between the two motors so I can slow down the passenger motor.
  8. 212sparky

    Hello from Columbus, OH!

    Get a chiltons or haynes repair book, aka tm for your car and look it up. Should not be that hard. If it is just bolts, get some good grade 8 hardware and bolt it back up. Also post a picture.
  9. 212sparky

    BFR Metals, Salina Kansas, a Goodie Hole

    How much for the m16 mounts? Also I need 2sets of seatbelts with the retractors and hardware from floor to seat. Thanks glen, don't woek to hard out there!!
  10. 212sparky

    MEP-003A hook up question

    Your grounding conductor will keep the frame grounded and drain short circut current. the finer the strand the more flexible and more current the cable will carry. Inspect your cabling before each use for dammage as well.
  11. 212sparky

    MEP-003A hook up question

    That is correct. Make sure you have the frame of the gen set grounded. If you are using aluminum wiring use a no oxide compound. It is also good practice to use it on copper that is out doors as well.
  12. 212sparky

    Hello from Columbus, OH!

    What happens at Kip's stays at Kip's. Where men are men and the sheep are scared.
  13. 212sparky

    New from MN

    Welcome to the site. I have family all around the cities. There is no cure for the disease you have infected your self with by getting green machines :D
  14. 212sparky

    Wont Start

    Do you hear a click from the solenoid? You may have a bad start button. You have to push hard and constant on it.
  15. 212sparky

    Loud Bang between 1st gear and Reverse

    Hope you have the extra rear member that was cut off. Otherwise it will get expensive quick to ship in the chunk since you have some bad teeth. Change the gear fluid and you will probably find metal in the fluid.
  16. 212sparky

    Hi from nothern Indiana

    welcome to the site. You should come on out to haspin acres Oct. 19-21 for the fall rally. http://www.steelsoldiers.com/steel-soldiers-rally/90981-2012-fall-haspin-rally-2-a-2.html it is a blast.
  17. 212sparky

    2012 Fall Haspin Rally 2

    I bring everything including the kitchen sink for some body else to do the dishes in.
  18. 212sparky

    Loud Bang between 1st gear and Reverse

    My nuts on the short shaft like to come loose, they make some interesting sounds and vibrations.
  19. 212sparky

    Hello from Columbus, OH!

    I have an outhouse at our farm with a flushing toilet and a store near by with cold beer. Oh yeah shooting range as well.
  20. 212sparky

    Hello from Columbus, OH!

    lets do it. Just where?
112,869members
166,361threads
2,342,886posts
690online users
Top
✖
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks