Search results

I have bad luck with automatic trannys. One of my trucks, M923, has just developed (in the last 100ish miles) a strange shifting problem. When shifting into 3rd, it will rev up like it's going to neutral then it will shift into 3rd. It doesn't seem to happen when the tranny is cold or if my...

Hi all, I was going to adjust the shift rod on my M923 but ran into a minor issue, I think. The throttle shaft will spin 360 degrees. My other truck has idle and full throttle stops so I knew this was not right. I peeled back the thin plate behing the throttle lever and found the set screw on...

I have a cummins 335 small cam engine that I'm going to pull the turbo, intake and exhaust from and install it on my NHC250. Can the piston oil squirters be removed from the 335 and add them to the NHC250? I'm not looking to make a hot rod, just a little more power and clean up the smoke. I...

I have some questions about the spicer 6352 trans (non OD) in my M54A2. It grinds almost every gear and the fluid that was drained from the unit was full of brass shavings and black. Is it worth rebuilding? If so, does anyone know of a good source for parts? On a side note, if you know of a...

I'm considering adding a front locker to increase my traction in rough terrain and snow. I'm thinking of putting it in the front since it is only engaged on demand and shouldn't have a negative effect on road or most other conditions when the sprague is not engaged. I don't want to add it to...

Are the heads, block, crank and rods the same in the LD, LDT and LDS engines? I have a friend who is giving me an LD engine and I would like to rebuild it with LDS pistons as a backup for my LDS 465-1a. I know the pistons, injection pump and injectors are different, I just want to make sure...

Hello, All of the rubber brake lines on my M54A2 are cracked and in bad shape. Does anyone have a part number or source for replacements? Thanks!

Hello, I'm looking at purchasing a 5 ton but the seller knows very little about it. He says it's a 1953 kaiser but is not sure. He thinks its a deuce! But it's a 5 ton for sure. It has the LDS 465-1a engine thats runs great and was rebuilt in 1969 based on the engine data plate. All I have...