Search results

We used 2X3” 1/4”wall tubing for “B” pillar 1X3” 1/8” wall for “c” pillar, 2X2” 1/4” wall for the A pillar. With 1X1/5” 1/8” wall for the diagonal (speed braces) Fits under the hard top. And all the pillars and associated cage supports are bolted together up vertically. Love it.

Sorry just remembered to say we used a small tiedown strap to squeeze the rubber bead lock down to install in the tire first.

We don’t understand,? We changed tires and with the wheels split we slid the tire down and the put the bead lock insert in, lubed up the o ring installed the other half of the rim and run the nuts down and done.

TES TES 439 is for 5000, 6000 series transmissions

We were looking at a friends truck and he wants to pull it in our shop and change the trans fluid and filter. looking at the Allison web site we read it like” if your only going 30 MPH or under”? Because the TES 295 spec calls out conventional or synthetic ATF.

My trans gage is way off, but it’s consistent, about 75 degrees cooler than the gage. Verified with output line. Switched to Dextron 3, no regrets, 19k and still driving biweekly. Pulled some 12k loads ( on a flatbed trailer) with it. It’s a 1545 love it. And yes for the record our opinion is...

Did not know the lights were 12 volts, learn something new every day!!

And everyone knows that if you have two batteries you hook them up ++\ - - unless your working on 24v system. Probably why it’s been sitting. it’s hard for most people to blindly hook up a positive post to a negative post. without thinking something bad will happen. It’s a GM pickup who ever...

24 volt starter on 12v batteries will spin slow Pull a head light out and see if the part #s cross to 12 or 24v

“.058 run out. Take that tire to bonneville and set some speed records.

P.M me and we along with others are not smart enough to post pictures. But we have a not that noticeable switch that was cheap and easy to hook up.

To run seven(7) normal, But!!! have to obviously plug the hole.

We put a cage on our hmmvee and we made sure that there were those “diagonal speed braces” installed. Makes us feel better with the grand kids riding along.

When the fan engage’s it cools down to 180-182

Sorry cools down to about 180-182,

Just a wag, but try looking up a napa “Hummer” axle?