Search results

Hello, I have several of these units myself and our rescue group has them as well--- their weak link is the battery pack..... it is a split pack of stacked dry hawker cyclon 2volt cells maing two banks of 12volts each....... it works sort of like a series parallel switch-- the two banks in...

Hello all, I want to install some additional antenna mounts on my blazer and was looking at the AT series nutserts and install tools to do this... the only issue I have with the nutserts is that the flange on the newer ones is considerably narrower than the originals I currently have in the...

Hello all, I plan to have a ton of random stuff at the show for sale..... some notables are amber headlight bulbs (only 3 sets left) clear headlight bulbs (about 15 sets) crank up landing gears for the m105 and similar trailers (bringing 4) deuce lug wrenches and breaker bar handles fire...

Hello all, Well, after getting around to tinkering with my Mep002 genset I got from GL several months ago, I decided to see about getting the correct fuel, oil and air filters for these units. I read about the modifications that can be done to commercially available filters to make them "fit"...

Hello all, Well tried the search, but none of the posts really answered my question or listed the symptoms I am having so I am here to pick your collective brain....... Background on this truck: 1984 M1009 last serviced 11/07 by the guard, paperwork indicated the trans, transfer, were...

Hello again, Well, the truck is currently sitting in one of the local body shops (which, incidentally, gave me the list of parts to order from LMC-- the shop was very apologetic and I realize it was no their fault -- but the owner ad I are at a loss as to where decent panels can be...

Hello all, Ok here is the problem-- I have my '85 M1009 in the shop to get some rust repair done, namely the rocker panels and the adjacent drain channel that is under the sill plate in the doorway ... LMC truck did not show a repair panel for just the drain channel but rather shows it as a...

Hello all, Ok so here is the deal-- I have two trailers, an M750 and an M313 that I am working on. Both have the fuel fired heating systems intact and hooked up but have warning tags inside of possible asbestos contamination but the ducts were not sealed up as per the MWO. Now, I know about...

Hello all, I am actually looking for two of the body mounted/ bulkhead type receptacles as shown in the pic above (one to fix the one I broke on my trailer and another to convert my s280 so I only have to have one cord/plug combo...... If anyone does do a conversion or has a few of these...

Hello, Well if the gears are still good, I think I can help.... I have a winch that was robbed of its gears sitting in my parts stash...... The only problem is how to get it to Florida from Central NJ ........... Ziggy

Hello all, Well, I picked up my CDR valves from m38inmaine at the Weare show--- by the time I got there though there were only about enough to fill half my order...... Well I got the remaining valves shipped to me in yesterday's mail and was surprised with an extra valve which Mark had dropped...

Hello all, I have a few large sheetmetal and related parts for the deuce that I can bring to Aberdeen if anyone is interested. Due to space constraints, I will not bring these parts unless someone specifically wants them....... 2ea M35 hood, t/o, straight/clean.......................... $110...

Hello again, The first batch of bulbs are in... (picked them up friday)..... Everyone who indicated here that they wanted a set should check their PM's.... So far, 21 sets have been called.... leaving 4 more sets for this batch..... I think I am going to go ahead and have another batch of 50...

Hello again, Well the first batch of bulbs are ordered..... I should be hearing from them in a week or so to come pick the finished ones up---- When the first batch comes in, I am going to go down the list and PM everyone who indicated they wanted a set-- I am thinking USPS insured is the...

Hello again, Ok, to clarify a few things asked here and in PM's----- - No, no one needs to send me their headlights-- the price above was figured out based on a caselot of new bulbs delivered to the company, coated, put back in their boxes, and then picked up by me and subsequently sent out...

Hello again, According to the company rep, this coating will work at temps up to 200 degrees F. If this coating is applied in conjunction with a metal oxide (gives it a shiny metalllic look), the temp. jumps to 900+ degrees. As for time, that I really dont know..... To put it in perspective...

Hello All, Well, to make a long story short, I wanted yellow headlights for some of my equipment---- needless to say, the yellow bulbs are nearly non-existant. So, over the course of my research, I learned that one of the suppliers to my dad's company manufactures specialty coatings for glass...

Hello all, Just a quick question... is the DB2 4521 injection pump available from various rebuild outlets the same as the DB2829 4521 pump on the cucv? (I am hearing conflicting stories-- some places are saying that they are the same-- some say they aren't)............ On another note, is...

Hello, I want to pick your brains with a few m818 questions.... First off, whats a good civi equivalent for power steerig fluid that I can use to top off whats already in the system? Secondly, can anyone give me an idea of how hard it would be to convert the truck's parking brake to one like...

Hello all, Ok, there was some confusion as to what the module number is thats missing in the amplifier...... it is the A520 circuit card which holds the A250 intercom amp as well as two transformers (also missing)........ One of my notebooks listed one of the transformers as being an A5 (which...