Search results

Okay, Here we go.... #1 They do charge for welchers #2 They don't allow this.. #3 They don't require this. #4 They also do this #5 They beat us us, we quit bidding early, So? #6 All is takes is one or more to screw it up for the rest of us, like the HUMMVEE's #7 We can deal with it, go home or...

As far as water in your air lines from the compressor, get a water separator/air dryer & install it coming out of your air compressor. That will eliminate the water problem. I'll let the professional painters here give you the rest of the information as for painting your truck.

I have the same issue with a 1081, so I will give it a try this afternoon when it warms up a bit more here.Thanks in advance.

Welcome from Florida!

Update time, the friend who was having engine oil manufacturing problems contacted me this afternoon with his truck situation. The trucks filters were not a part of his problem, just an odd symptom. The two almost full 5 gallon buckets of oil & diesel fuel were causing oil to blow past the...

I would be happy just to find a M1082 to try & figure out how to load it, but all of them seem to be 400+ miles away as the 18 wheeler flys/drives. One day maybe.

The weight isn't the big gorilla in this picture, its being able to sling load it with long enough forks. You have enough fork to make a basket sling or hook chains to the lifting eyes on the attachments built into the trailer. The big lifts that they have @ a lot of the GL/GP sites will do the...

It has to be a pretty large forklift to be able to sling load a M-1082 (A1) although it can be done with care & the right equipment.

Here is how I camp on the MV meets, look inside the back of the Deuce to see how much room there is! Oh, there is a camera in there to be able to keep an eye on the stuff if it starts to shift during the trip. If you can't see any space, its because somebody threw an air conditioner & a...

Same problem here, link no worky!

Re: Fuel & oil woes when they wind up mixed in the wrong place! A fellow Steel Soldier in the Ocala area had a problem with his Deuce today of fuel spraying out of what he thought was the primary filter. The filter has not been checked or replaced in eons, so off to NAPA with the numbers I gave...

I've used the Deuce to sleep in for the last three MV meets here in Florida with no real problems. The only issue is the 3 new in crates Deuce staves, bows & covers that fill up 2/3's of the room in the back (I thought they might sell). After putting the military cot up, there is no room left to...

James is a real trooper when it comes to wheeling & dealing. I don't see how he gets around so well on that shattered leg, but he keeps going & doesn't complain. I've watched him move LMTV tires complete with rims like they were nothing. What he really needs is more folks to take a few more...

On my Deuce, I installed a rear view camera system that allows me to use the camera over the pintle to hook up a trailer as well as see whats going on behind me. The second camera lets me monitor the blind sport on the right side of the truck, you can switch between screens or use a split...

Good advertisement for the wife about your new tires. I'll have to remember that one! ;)

I have a 701a & it is LOUD despite the ASK, not to mention heavy & large. The battery will run you about $285.00 dealer cost from NAPA (it is an ITAR also)& the charging circuit is prone to failure. Your much better off with the 831a as it is readily available for surplus purchase & parts are...

I have two of those in storage just waiting on a good idea to use one of them on!

Jwade, they may replace the person in your old job, but they will never replace how well you performed your duties & took care of the many, many problems that always cropped up with auction results & issues that came up later on. I personally owe you a great big Thank You for helping straighten...

Thanks for that info, I see that it is not feasible unless I am running 3 phase equipment. Back to the drawing board.

I am not sure about this one, but can a 3 phase MEP-804A be converted to single phase without a large amount of changes? Is it a doable project or a long shot. I do know that most other smaller gensets have selector switches just to do that, but am unsure of this unit! :?