Search results

It is one piece.

Both are correct. It is a donought gasket with an alignment flange

If you have run flats it takes a few miles for everything to be happy.....

Try to find a specialty shop that does 4x4 ,lifts, and customizing. They will be more likely to help. Tire shops that do 3/4 or 1 ton pick ups will not be intimidated. Best to balance even though military does not to have a better ride.

For all trucks with glad hands. Glad hand with seal, 50ft poly hose, air chuck Perfect to carry for tire emergency or to inflate tires. Chineseum from a truck stop that closed. $20 plus ride 2 for $35 plus ride I get good rates with fedex. PayPal ok plus 3% Venmo or zelle ok for...

You can place a price and also say open to offers and trades. This way you are in compliance and best of both worlds. There is also a place for "free" classifieds pay it forward.

maybe run through shifter and make sure it is truly in neutral.

We appreciate your support of the site! :tank:

That square tube bar is not as old as the medium and uses specific feet to it.

Ditto to NDT Only thing I would add is too maybe collapse the bar to its shortest hole but I took a 2nd look and you might already be all the way collapsed.

If it is the military version, then they are 24v. Post a pic of your bar.

Welcome to steel soldiers! looks like a nice truck!

Those triwalls were going to drmo anyway...:rolleyes:

The railroad flat cars do not look right. Military typically use ttx leased flat cars that are yellow and 86ft long. They also have their own dodx flat cars but usually not for common rolling stock. The flat cars also look like they have pockets for stakes like pipe etc. And the wooden floors...

I believe the oe wiper arms have an alignment slot on the knurl so if the wiper linkage is hooked up correctly to a working motor, it should not let them go that far. They park at something close to a 45' angle,

Try the 3/8 by hand but long ago when I was in parts , I remembered all the gm r4 compressors were metric.

Some locations do allow you to preview. You have to call and work it out with their Point of Contact as each location is not manned and some that are have limited hours/days. Iron Clad guarantee is a joke and very very very few are made whole and it has a deductible. Do not use that as a basis...

Thanks for getting back to me. Could you see if the wheels are really 2 piece bolt apart or has the wheel been modified with an original center piece and a custom adapter made to fit the original bolt circle? Hope this makes sense. The pictures on your pay it forward are difficult for me to see...

Your best is to buy from a well respected member who is Greg 86humv. I can't imagine a dealer giving you a better deal especially on shipping and handling. Ymmv

Is this a military vehicle? How old? Does Alabama issue Titles? I know Maine for example does not on an older vehicle. La will accept a Maine Registration and issue a La title when transferred. Since it is registered in Al if they do issue Titles then easiest & cleanest process would be to get...