Search results

Howdy, I have found some good replacement parts. Trailer Jack Handle Replacement Bulldog Sidewinder Handle part# 100105 Inside Gears Bulldog beveled gear set Part#500106 Push-to-release pin 5/8" x 2.5"grip L handle Ready for action, Trailer Jack

Howdy, MEP-802A/803A wet stack information. sample MEP-802A wet stacking A lot of the military units are run lightly loaded, or simply not loaded. They might even be started and run for a hour or two every other month. Whatever the situation, the above picture shows a case of wet stacking...

Howdy, Guy is right. :-P They were built to run 24/7. Put a good 4-8 hours of hard load on that unit. It will clean it up and run better.

Howdy, All I can say is, "slow down slick" You could help your self out about thinking what you post first. You could have posted pics of the data plate and follow it with overall pictures of the truck. You do not need pictures of anything 5 inches close. It might be rare, but, you will also...

Howdy, Being the case, I also assume they (cat eyes) will probably need 24v to work. M1101, M1102, LTT-TQG around 2008 and newer have Omni-volt LED marker lights, and standard incandescent bulbs in the tail lights. Yes, re-wired also with a cheapie 7-way plug, all 12v now. You only have 4...

Howdy, The fuel fill stays in place to access all the other fuel tank stuff.

Howdy, The problem that I ran into is using the huck bolts. I wanted to put my rear leveling back on (LTT-TQG) and you can not find the gizmo to handle that large of a huck bolt. The smaller ones, yes (CAT dealer and a 18-wheeler reefer repair joint). But, they could not do the large huck bolts...

Howdy, The trailer M110x manual has it listed as Fulton Grease Cap - 2.722" Outer Diameter - 1-7/16" Tall - Drive In I would assume any cap which is 2.72" diameter is going to work. NAPA 730-2413 CAP-GREASE/STYLE 1 You will probably need to replace the cap. There is no precise easy way to...

Howdy, The MEP-8xx series of generator all use diesel fuel return lines. After sometimes sitting with no fuel, or heat cold, no-use etc... they start to fail. The main issue is the lines start weeping fuel. NSN 4720-01-483-6467 part N20353.5 HOSE,NONMETALLIC Name Value CROSS-SECTIONAL...

Howdy, Here is a good starting thread with filters and other MEP-8xx generators MEP-8xx Replacement Parts

Howdy, Man, that was quick. It seems you just asked about them and bam, you pick it up. Good deal. You will find all your MEP-803A information here on the site and from other great members.

Howdy, It is a pretty site along route 997 passing Letterkenny. You look over and see about 4000 Humvees.

Howdy, It is also surprising of what exactly a true 10kw generator such as this can handle. It really does take a lot to get up to the 133% load line. But easily handle 10kw all day long without issue.

Howdy Guy, It's kinda like saying you never did anything on a generator in the field. :) Like a only correctly running generator needs a tier 2 reset. As some know, even those were not 100%. :burn:

Howdy, A typical generator in the field is repaired as needed. Small things are done and accomplished. If the generator has a catastrophic failure, it will be sent to a higher level repair facility. Letterkenny Army Depot is just one of many repair facilities. A tier 2 reset is a break down...

Howdy, The 800 series TQG has 2 different fuel pumps. The older style is a square Facet electric fuel pump. The newer style is a round Airtex E1074 fuel pump. This is the primary pump location item. A lot of the units already have these mounted, or have been replaced with the round Airtex fuel...

Howdy, Most just simple replace the type they have. If you have incandescent, then you use incandescent bulbs. PU-798A Unit = Mep-803a on a LTT-TQG trailer (M1102) All the bulbs are standard incandescent. So swap out the bulbs for the 12v counterparts for a brighter safer day. Rear brake...

Howdy, Chambersburg, PA = Letterkenny Army Depot The GovPlanet site is there, kinda off-site. Area view via Google Maps if you zoom into that picture a few times, you are right at the GovPlanet yard You will still need all your papers and id, but, is much easier to pick up and leave than...

MEP-802A and MEP-803A manual information MEP-802A manuals you should have TM 9-2815-252-24_____ Diesel Engine Model DN2M TM 9-2815-252-24P____ Diesel Engine Model DN2M-1 Parts LO 9-6115-641-12____ Lubrication Order TB 9-6115-641-13____ Winterization Kit Tech Bulletin...

Maybe someone has a parts unit? A lot of parts are similar between the MEP-802A and MEP-803A. The gasket is the same. But, the muffler is not the same.