Search results

Hello - Looking for the passenger side long trim for my dash. Anyone know where I can find one? Search the forum, didn't see anything that helped. Tried the usual parts sources and they're either not listed, they don't have them, or I just didn't find them. Thanks much....

Looking to restrict the airflow over my radiator this winter. Barely gets warm enough for reasonable heat, definitely not enough for defrost. Any suggestions? Did search a bit on the site, but found nothing. Hoping to find the actual military cover.

So when I apply the brakes, the right front turn signals illuminate. Rear bulbs removed, same thing. Anyone run into this one? I have the manuals, but my wiring diagrams are mostly; missing from them.

Anyone know where I can find the actual docs to install a kit in an M818? I've searched, yes. I've also scanned every page of docs on the old site. Nothing. Did I over look it? It's possible! Thanks much!

Thought I'd share these photos I took at a rest stop while I was heading to Daytona FL a while back. I can't remember if posted these or not. Anyone have additional photos of this type all finished up? Thanks...

Hey guys.... Not sure where to post this, but thought I'd keep y'all in the loop during the color change and WW2 'conversion' of the Borgward. It's a 9 seat convertible intended as a staff field vehicle / command car.

Greetings fellow Mog owners..... I'm trying to hook my 1944 Army Corps of Engineers trailer to my 1938 FBW (upcoming event). The trailer has a standard (large) pintel eye, and the FBW has a small Mog-type pintel receiver. Anyone adapted their US military trailer to their Mog? If so, what did...

Who are you? Nice looking truck! Very original.

This valve is not cooperating. Does anyone out there have a source for one? Thanks much!

Cleaning out the hangar recently to reorganize for new projects and thought I'd share some of the photos with you all.....

Ok, so I have this great little German Shepherd Schutzhund named "Sonja von Botropp" and thought I'd mark my M1009 as a USMC K9 MP unit. Seemed reasonable since I have the perfect prop, and she LOVES to ride in the car. Can anyone help with some photographic evidence of what it might look...

Greetings, So The Maddawg Mike was kind enough to stop by and sell me a proper trailer pintel for my M1009. Currently my license plate is mounted where this pintel belongs and will need to be moved. Can anyone provide photographic evidence of where this tag belongs? Thanks much!

Greetings again.... So being the purist in most things I noted that the batteries in the new M1009 were not 'military' spec / type, etc. I have an M818 that these batteries were installed in with good luck. So I thought I'd see if they had any at the same battery place in town. Turns out...

Greetings, Once again asking for advice..... Tomorrow I'm going to buy 5 tires for my M1009. I would like to fit 33x12.5R15's to stock rims at the stock height. Ok guys, what am I doing wrong? Any and all thoughts welcome....

Greetings, Just wondering if anyone could tell me more about what I have here. 1985 M1009 Blazer with 51, 500 miles. Clean, no rust. Seats in perfect shape, and clearly babied. Never had radios or antennae mounts. Single star on front and rear bumpers. See photos. Any feed back...

I have a 6.2L diesel that is vibrating when it runs. It has what feels like a dead miss, but all cylinders are producing heat at the manifold, and all diminish power when the fuel line is cracked at the injector. There's very little smoke, at any power setting. Alternator, P/S pump, and water...

Greetings, I have a 5-ton Steel Soldier from Switzerland built by FBW in 1938. First of four built for the Wehrmacht and never delivered. It has 16,000 original Kilometers and starts, runs, drives, and stops. In the process of servicing this truck, I've found the finding the fuel filter is...

My XM818 tractor is currently getting a set of super singles with 16.00 x 20 Michelin XL recaps. The installers noted that the rear wheels will ever-so-slightly touch the center suspension pivot point cap. Are different caps available for this mod or do I have to get creative with the cap...

Yesterday I put together 4 HEMTT wheels on Michelin XL recaps (new). I put 80 lbs. in each and let them sit overnight. This morning they each have exactly 70 lbs. At this rate, the tires will be empty inside of a week. What did I do wrong? Thanks. Den Kaiser XM818

Greetings, A friend and I are driving a low miles M818 tractor 1200 miles starting on Friday the 17th. Aside from the obvious, what special tool and travel considerations would you folks advise for this long ride. I'm bringing a complete drivers manual, tools, VOM, 3/8 I.D. hose and clamps for...