• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Search results

  1. J

    M52A1 (Mack) oil and fuel filters

    I can't seem to find the part numbers for the oil and fuel filters on a newly acquired M52A1 (Mack engine). Can anyone help me out on part numbers and where to get them? Jim
  2. J

    M920 Circuit Breakers

    Anyone know where you can get the circuit breakers for the M920. The one I need is the one with the two bolt suds, labeled CB- 1 thru 9.
  3. J

    M920 Engine RPM retarded

    I am still working on getting my newly acquired M920 on the road. The problem I am working on now is that the engine rpm's won't go any higher than about 1900 rpm. I have been looking for information on the engine governor in hopes that it might point me in the right direction. Any ideas as...
  4. J

    M920 Volt meter wiring

    Got my 920 a couple of weeks ago. Working through problems one by one. I am now trying to determine why batteries (new) aren't charging. I started out by looking at the voltmeter gauge (on dash). I have attached a picture of the wiring as well as a partial diagram of the wiring to the...
  5. J

    M920 Pusher Axle control problem

    Got my M920 last week. One of the first issues I need to resolve are the air leaks. I have two left unresolved. The first is the Saftey relief valve on the air drier. Anyone know a replacement part. The second issue is that I continually have air coming out of the lift/lower control valve...
  6. J

    Goat air filter part number

    Does anyone know a non military air filter for the Gama Goat?
  7. J

    MEP-005 (30KW) air cleaner needed

    Does anyone know where I can get air cleaners for an MEP-005. NSN 2940-00-631-1362 70-4020:P131919.
  8. J

    M561 Gamma Goat Markings???

    Does anyone know the correct locations for markings (Registration no., stars etc) on the M561?
  9. J

    M561 Gamma Goat Windshied Defroster

    Anyone know where I can get that funny looling piece of sheetmetal that sits on the dash of the Gamma Goat that directs air to the windwshield?
  10. J

    M116A2 Trailer Date of Manufacture

    I just got a PU-620/M generator set. It has two MEP-017A generators mounted on a M116A2 trailer. Anybody know how to find out the date of manufacture of the trailer. It is serial number 821. NSN 6115-00-738-6340. Also, the trailer has the new style tires. Can I still mount the 60s-70s era...
  11. J

    M35A2 door hinge screws broken

    I have an M35A2 that I was trying to replace the door hinges on. Two of he screws that hold the hinge to the body frame broke off. The screws go in to some sort of "floating" plate in the frame. Is is possible to get that floating frame part out? I can't get a straight angle on the screws to...
  12. J

    M151 Transmission removal

    Is it possible to take out an M151A2 Transmission without taking out the engine?
  13. J

    M35A2 Oil pressure sender specs

    Does anyone know the specs on an M35A2 Oil pressure sender (resistance for various oil pressures)? I am trying to troubleshoot low oil pressure to see if it is guage, sender or pump. (it is a 120 psi guage)
  14. J

    Electrical wiring harness equivalent wire?

    I have a short in the wiring harness of my M151A2. I need to bypass it with some other wire. I have the connectors, but I need a recommendation on the type and size of wire to use (also where I can get it if not common), especially wire that works with the waterproof connectors.
  15. J

    M151A2 sluggish in 2nd and 3rd

    I have been trying to the M151A2 I got last October road worthy. I replaced the electronic ignition module with one from an "extra" used distributorthat came with the Mutt. I put a new carburator on it. I have checked the timing. It idles real good and seems to run real good in 1st and 2nd...
  16. J

    Need AN/GRC-106 Radio

    :D I am trying to put together an AN/GRC-142 (or 122) Radio Teletype rigg. I have all the insides except the AN/GRC-106 radio and the S-250 shelter. Anyone know where I can come up with these?
Top