Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
As dumb as this may sound, I am not sure where the hot air comes from. I just bought the goat this week and have not picked it up yet. The only obvious thing I saw wrong with it was the hole in the dash where this defroster deflector goes. I hope to know more next week. Thanks for the good...
Gamma Goat markings
Thanks, this is exactly what I was needing. I will be contacting you as soon as I can come up with a registration number to put on it. I am having a hard time coming up with the Registration number. May have to create one.
a. 225249760
b. what I am really trying to find
c. 2320008735407
d. private ownership. I'll be 3rd or fourth owner
e. None on vehicle
This is an M561 Gamma Goat , 1971 Mfg by AMC.
There is only one field on the M116 trailer data plate where you can stamp a serial or registration number. It is labeled Serial number and has 821 stamped in the blank space. There are no spaces on the PU-620 data plate for any serial numbers. However, in the upper left corner of the PU-620...
I just got a PU-620/M generator set. It has two MEP-017A generators mounted on a M116A2 trailer. Anybody know how to find out the date of manufacture of the trailer. It is serial number 821. NSN 6115-00-738-6340.
Also, the trailer has the new style tires. Can I still mount the 60s-70s era...
I just bought and M35A2 from Redstone, AL (June 09)
Ser. # 0525 17559
Reg # 04A-57571
Bumper number OHARNG HQ25
Can you still provide me with the year of Manufacture?
Thanks for the help.!!!!
M151 Timing light and timing mark
Any timing light will work. I have a cheapo one from the local NAPA store. Only thing you need to do is hook it up to 12Volts instead of the 24 on the MUTT (hook it across one of the two batteries or use a seperate battery) You will also need to have an adapter...
Thanks for the feedback. I was afraid you were going to say something like this. Wish me luck.
By they way, is there some sort of special hardness bolts/screws I should be using when putting the new hinge on?
I have an M35A2 that I was trying to replace the door hinges on. Two of he screws that hold the hinge to the body frame broke off. The screws go in to some sort of "floating" plate in the frame. Is is possible to get that floating frame part out? I can't get a straight angle on the screws to...
Does anyone know the specs on an M35A2 Oil pressure sender (resistance for various oil pressures)? I am trying to troubleshoot low oil pressure to see if it is guage, sender or pump. (it is a 120 psi guage)
I have a short in the wiring harness of my M151A2. I need to bypass it with some other wire. I have the connectors, but I need a recommendation on the type and size of wire to use (also where I can get it if not common), especially wire that works with the waterproof connectors.
I don't have any problems starting it. A little choke and a few pumps on the accelerator, and it's running. I'll see how it does in 3rd and 4th will a little choke. Thanks
I have been trying to the M151A2 I got last October road worthy. I replaced the electronic ignition module with one from an "extra" used distributorthat came with the Mutt. I put a new carburator on it. I have checked the timing. It idles real good and seems to run real good in 1st and 2nd...
:D I am trying to put together an AN/GRC-142 (or 122) Radio Teletype rigg. I have all the insides except the AN/GRC-106 radio and the S-250 shelter.
Anyone know where I can come up with these?