Search results

Sorry for the stupid question but I'm at pep boys and didnt plan on coming here or I would have measured myself. What is the diameter of the exhaust after the muffler? I need a section of flex pipe to do a quick fix and I figured it's roughly 2 inch pipe. Does that sound right? Thanks Tyler

5th Annual Kami's Krusade Against Epilepsy Poker Run-Saturday June 25, 2011 Well Folks, Figured I would post this for anyone wanting to Attend. Its a real nice event for a great cause. Its starts here in Halifax PA at "the nook" in town. its a few hour event, goes thru local towns, Not sure...

After reading every thread after searching about these I'm still a bit in the dark. With the brakes locking up on the deuce and with the airpack eliminated as the problem I'm going to go ahead and do a master cylinder rebuild. I got a rebuild kit or $26 from Saturn surplus today and there looks...

Well, I searched and found a relevant thread with out a conclusion... I know, big surprise there http://www.steelsoldiers.com/deuce/149-lots-crankcase-oil-blowing-out-exhaust.html Exact same problem... Pulled her into the firehouse to continue working on my brakes and I honestly didn't go to...

As the tittle states... I was going down the road and I pulled into a side road cause I thought I smelled something funny... Well what do ya know the brakes were locked and smoking, there was a loose air line into the master cylinder I think?? Behind the drivers side toolbox, with a skid plate...

Anyone dealt with this problem before. After only gaining a few more rpm's after my filter change I started asking around. One guy said the snotty slimy stuff that I got out of my filters sounds like algea, and he said if it has truly sat for a few years it would have a real good chance to...

Ok, so yesterday did the first filter change since I've had the truck, I couldn't believe filters could get so bad. I was dumping sludge looking stuff from all three canisters. Anyway after the change I took her on a spin, I was able to get my RPM to about 2100-2200 where before I could barely...

ok, so i figured instead of starting a new thread every time i make a mod i will just update this thread. Hope that is ok with everyone. If i run into a major problem and need help i will start a new thread for the benifit of future searches for that/similar problem. Hope that makes sense?? So...

Well, Just got back from Colemans.... Bought me the Deuce!!!!!:shock::razz::razz::razz: I called them before Went there, they pulled it out and had it running ready for me to take a test spin around the yard. well i guess that just pushed me over the line from wanting it to needing it! well...

See for updated info http://www.steelsoldiers.com/members-rides/66110-purchased-deuce.html Well i went up to Colemans Surplus, Looking at Dueces, Spent an hour and a half climbing all over looking :-):driver: Well i might have found one for myself. The only downfall is its a non-turbo, but...

Testing

Just another idea, But would this work to get 12v on the 24v System? you obviously continue to run the two 12v batteries in series to get the trucks 24v power. but also hook them up in parallel to gain the 12v using both batts so your not using one more than the other. I made a quick sketch to...

Hello all, let me start by saying it looks like a great site here with tons of useful info! I stumbled across this site a few times but never really looked around much. OK, so a little about myself, Im 19 from Halifax Pa, i do not yet own any military vehicles but hopefully by next fall i will...