• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Search results

  1. 800summit

    North to Alaska

    Have a safe trip, bring some fuel, because Canada is expensive, enjoy the ride, and have some fun
  2. 800summit

    I got me a Winch!!

    oops did not see the 2nd page
  3. 800summit

    I got me a Winch!!

    If you have it out, Check the Drum oil seals. Long time sitting will dry up the seals . you will have to remove the cable, and pull the winch apart. The job is easy, the parts are heavy:cry:
  4. 800summit

    M first deuce-Alaska registration?

    Yes I also live in AK, I registered mine as HISTORIC. $10 one time fee
  5. 800summit

    Need licence plate sugestions...

    Your from Nebraska right
  6. 800summit

    Need licence plate sugestions...

    no corn:-D
  7. 800summit

    Air compressor belt

    Napa # 25-9510
  8. 800summit

    Compressor wrenches are here!

    Count me in for one also:-P
  9. 800summit

    My collection of Deuce trucks

    What size and brand are the tires on the Singled out deuce
  10. 800summit

    solargizer quantity on deuce

    Did a follow up on the Solargizer, it has been down as low as -35F below zero this winter, went out 4 months later on a warm day 24F above motor cranked as if it had brand new batteries. Solargizer is setting in the defroster on the front windshield a in the general direction towards the Bright...
  11. 800summit

    Do you need a big rig liscence?

    Try to get it registered as a Historic Vehicle, check your local DMV laws. The DMV up here was going to charge me for a commercial vehicle $178. I did my reserch and found that a vehicle that is 30years or older qulafies as Historic. one time fee $10 never expires. I told them I was using it...
  12. 800summit

    Wheel Bearings Again

    also make sure the keyed washer that goes between the two nuts is in good condition and the 2 tabs go over the inner nut and the outer nut will need to have two of the tabs bent over so it does not move either 10-4
  13. 800summit

    Some Setting Adjustments needed...

    site looks like a real military site
  14. 800summit

    Wheel Bearings Again

    I just repacked and replaced 1 bearing and race on the rear axles, torqued to 50lbs then backed off 1/8 turn , did all this with the axle out, make sure the cork gasket is in place or you will be leaking past the outer seal. check with axle out for any binding on turning brake drum, then after...
  15. 800summit

    Ok, New site...

    just repling to forum
  16. 800summit

    Ok, New site...

    Had to use my night time goggles to see new fourm
  17. 800summit

    Suicide Budds?

    If you are up to it Do it yourself I just did it for the first time Yesterday, Had some issues getting the bead to break loose. called a shop and talked to an ole timer and had to go about breaking the bead. long story short I did it. You can purchase the duckbill hammer and spoons at NAPA. then...
  18. 800summit

    solargizer quantity on deuce

    Thanks, That was the answer I was looking for
  19. 800summit

    solargizer quantity on deuce

    RE: Re: RE: Re: RE: Solarizer on the duece I was wondering if you leave the Solargizer connected while the engine is running, did not see where you would have to disconnect it while driving
Top