Search results

On the very inside of the plug is says 4-20. That said I pulled a ton of screws out and never got close to the receptacle. But I did find a schematic behind the front panel. It shows the following for the power receptacle. J1, MS 3100R-20-4PX P1, MS 3106R-20-4SX

Pics may not have posted. I will check on my laptop later.

Got it. It was still in the crate. Smells like an old museum, lol. Here are a couple of pics of the unit and the plug. Would someone verify the plug type to the part numbers previously supplied. Getting excite to see this run.

I am heading out there Friday. They list them as unused, but that could mean just about anything. Maybe they don't sell a plug but maybe they have something to test it. If I do make the purchase I will post a pic of the plug just to make sure. Measure twice cut once.

Thanks for the help! There are plenty of plugs available. Now all I have to do is get out there and check out the ac units. On another note, does anyone know how often the coolant needs to be recharged? Are military units prone to leaking? Or should I not have to worry about it?

I went back to the original post that had some information on the plug. They say it is a Amphenol Female Military Mil Spec Circular Connector MS3108A20-4S 4 Pins 90 Deg ". Did some looking and didn't turn up much.

Can you recommend a shelter AC/heater that would be better for me? Still like this model very much but I'm no electrician. I don't need to burn the unit up my 1st attempt .

Thanks for the manuals. I will read through them tonight. I'm hoping there's something in there that'll tell me what type of plug it is and how to wire it up. There is another post that I found that does list the part number for the plug but I am unsuccessful in finding a supplier. What...

Called Colemans yesterday and today. They are going to do some research into a plug. Seems strange to sell the unit but not the power cord. My own Google search has turned up nothing. Hoping a solution will turn up.

Hello, I saw one of the AC/heaters on Colmans. It caught my eye and I am interested in getting one. However it does not come with a power cord. All the searches I have done do not turn up any solid results. I know the plug at the AC unit is a little different but at the other end does it plug...

Well got to working on it. Cleaned it up really nice. Put a small Oring in the lock nut so it clinches down on the adjustment screw. Other wise it was literally spinning itself out. The old cork washer is still in there but it doesn't do as nice a job. So (lol) I have a new problem. I can turn...

I need some help. My brain is in a fog from working 14 hour shifts for the last 3 weeks. I have been working on tuning up a MEP-015a. I got the transducer and voltage regulator issues resolved. My remaining issue is the carb. I thought it a good idea to take it off and give it a good cleaning...

Wow. You were not kidding. I got a quote from a couple places $200 for one. I am checking out some other places but talk about sticker shock.

Thank you. That is it. I have never used parttarget. How good are they at finding what you need?

Hello, I need help with a part number and a seller for a replacement transducer that attaches to the voltage regulator. Mine is confirmed dead and I am having issues finding one on ebay. Many thanks.

Yeah. It runs ok. Voltage regulator needed to be replaced. Yesterday before I posted about the fuel pump I cleaned the sediment bowl and ran the generator with a load. After about 30 min of running the bowl was still empty. Keep in mind the day tank was very low. When I checked the connections...

Thanks for responding. So if I hear you correctly, if you hooked current to the pump if would make more then a single click? That it would pump repeatedly? The RF capacitor is the box attached to the positive wire on the pump correct? Given the way the fuel smelled the 1st time I pulled the...

I don't think I have the right resources to do an effective job. Is there a place that does work on these regulators?

Hello, I could use some help troubleshooting an issue with the fuel pump that is between the day tank and belly tank on my MEP-016D with a Yanmar engine. The issue is it never fills the day tank. Here is what I have tried and observed. For testing purposes I have bypassed the float switch in the...

Voltage regulator was the issue. I installed the replacment and it ran as it should. Can the stock VR be rebuilt? The SX460 avr looks like it really cleans it up. I have another unit I may try that on.