Search results

I got mine at Rock auto on line. ACDELCO Part # 15641780 $132.99 If you buy from a Chevy dealer it's almost twice the price for the same thing. I know because I work for a Chevy dealer. When I got mine it was made in Mexico. My friend is still driving the truck and the regulator is still...

M35a2-AZ Where did you find the kit? I've only seen one and they wanted $1600 for it. I would like to get one but not for that price.

Check and see if your truck is stuck in 6x6. Grab the front driveshaft and see if can move it. Being in 6x6 will bring your mileage down. Since I've heard about this problem I have found and fixed 9 trucks...

http://www.steelsoldiers.com/showthread.php?104214-M936-Battery-relocation

Here's mine.

Didn't mean to scare you. I know stacking blocks is never a good idea. They could shift and pop out. Also make sure they have the locating pins. most blocks are a heavy cast iron with the locating pins cast into them. Using box tubing they could crush down. Without having the bolt in on the...

I don't mean to knock anyone's work but those blocks look like an accident waiting to happen. It wouldn't take much of a side hit to knock them out.

This is my M931a2 I painted it, added a winch and its getting a LWS gun mount once the weather gets nice.

Looks like it's full length and the rear axle is right in the middle of where the tandem axle was. It looks like the same wheel base my old crew cab had. The Bed on mine was 9'

Nice! That's what I need.

I moved the heater controls and used their holes as pilot holes for the 2 1/4 hole saw. I used the line from my ether start and ran it to my boost guage.

Sure wish it would stop snowing and get warm so I could get back to work. Need to get the cab reinforcement and new cab mounts installed so I can get the LWS mount on. Still need the turret bearing.

Here you go Kevin http://www.steelsoldiers.com/showthread.php?25041-5-Tons-under-a-deuce/page4

Thank you.

Has any been able to get a copy of the file?

When I had my Deuce I put 10000 miles on it in a year and a half.

Also check to see if it's stuck in 6x6. http://www.steelsoldiers.com/showthread.php?83799-M939-transfer-case-air-lines-installed-wrong

I ran 100% wmo in my old deuce.

Welcome! What part of northern IL?

I agree with Suprman. I've replaced a o ring in my rear wheel on sat. I wire wheeled off the rust primed the wheel and reassembled with a new o ring.