Search results

Well I have in my shop a M45 Fire Truck that is getting a new clutch. Simple 1 day project, no biggie, Until. I pulled the flywheel to resurface it and I found there were real badly worn teeth in 3 spots on the ring gear about 4 teeth wide in all 3 spots. No biggie, we do ring gear repairs...

I have a M101 trailer and it is missing one of the pins for the corner of the racks. Does anyone have a spare pin I can buy that is the military matching pin to the rest? Please let me know. I can not find anything in that size that is not zinc plated

here is the M101A2 I have. Look at the lifting/tie down points?

Thanks for the pics,now for the questions. That has the front bulkhead? Isnt it suposed to be a flatbed? and the lifting/tie down shackles are a pin on arent they suposed to be a welded on loop on the front and a pivoting type loop in the back? It seems like these all have different...

wouldnt the A3 be wider and have a drop axel for the HMMWV?

I am looking to buy a M116A2 I think. I keep seeing them for sale but they all have the old dodge 5 lug wheels and that just does not seem right for an A2 and they also have the flopping shackles and not the welded on loops like my M101A2 does so what I need to know is what is correct for a...

I stock them at my shop. I also have good used ones too. And I take the bad ones in on trade, If you have one.

did you bleed the fuel system? lossen the black knob on the fuel filter and crank the engine for a few seconds.

GM1B is the part number for the correct tank for the M1008/K30 and it was never available from GM with anything bigger then the 20 gallon tank. The M1009/K5 had a 20 in it but also the civy version has a 25, 31 and 40 gallon tank

OK, I will check it out

what is white owl?

I stock the 6TL batteries and they are not too badly priced. I sell them for $165 wet or dry it is hard to get blems from East Penn because of the quality control. Exide also makes the 6TL but the Exit batteries are junk and dont hold up. Same with the Optimas they dont like the large Amp...

there is a 30amp relay located behind the STE/ICE plug that controles the gauge. take a metal object wire, long screwdriver, etc and touch one of the rivits next to the gauge to the gear shifter and see if the gauge works then.

I have an M101A2 trailer that I would like to convert the tongue to the M101A1 style without the surge brakes. So from what I see in the parts book I need the entire cast part on the end o the tongue including the landing leg. Where do I find one of these? does anyone have parts laying around...

That is true however there are atmosphear changes and that CDR valve is known to reak havoc on the Military engines but it is required to make the engine sealed from dust and other outside elements unlike the CIV version of the 6.2. If the government went through the trouble to put it there and...

Thecliosed flat metal cap will cause oil leaks since there is no way to vent excess pressure. You MUST use the tall vented cap to allow intake and exhaust of crankcase pressure. The cap is available from any autoparts store but you must look up for a 1978, 79, 80 chevy diesel truck with the...

there is a guy on eBay that sells them every once in a while for like $30 for the complete front grill kit.

I have Brand New not NOS glow plug modules for $175 with shipping included if interested. And the CUCVs need the 70s in order to function properly, the resistance is important and if the GPs are wrong it will wipe out the card. Also this is off topic but if there are any bad GP cards I am...

Re: RE: gmpartsdirect, what takes so long? I am also on the hunt for this module. is what you have new? Will you sell it without the harness?

That is correct and it somehow also sends power to the glow plug control card to power the glow plugs while cranking.