Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
You Own A shop?
I would have just taken the truck and when i got back to the shop I would remove the bent drag link, put it in my Axle press and bend it back.
Now that is just me and what I would do.
I would not chace getting black listed or something like that.
It does sound like...
Mine just started to vibrate alot more. I think it is the motor mounts. It started as the steel fuel tank gaurd started to vibrate and then the drive shaft started to also about a week later.I am just going to change the engine mounts because they are from 1985 and I am sure they are bad.I have...
My fuel gauge bounces also like some one is flicking it but only when it is not completly full. it starts ant about 3/4 of a tank and stops at a 1/4 tank.as long as it bounces it has fuel.
Nape sales the sending units for 67 dollars for the 2 hose one and 100 some thing for the 3 hose one if...
Please tell me what would happen if some one used copper lines.
I never have but would have if I ever neaded new lines untill I learned here that it is a bid NO NO.
Will copper lines pop like a ballon under 2000 psi or what?
Also at most parts stores sale steel lines call bundy flex that...
That is a good post my GEN # 1 used to flash on and off when the head lights were on and the brakes pushed.
I turned the idle screw 1/4 turn and it went away
I have found that It is much cheeper and less stress to just get the 24 volt starter rebuilt when it goes out.
Your front battey is always 12 volts so you can hook any thing up 12 volt there.
I run a 12volt 12000 pound mile marker winch to my front battery with no problems at all and still have...
It might be kind if hard to air the down when you nead more traction in the snow or mud.
But on the good side if you ever had a flat you more than likely could drive in it with out hurting the rim.
Yall got the best stories. I dont have a M35 but wish I had one or the place to put one. All I get is cards left under my wiper blades 6 times a year asking if I want to sale my M1008.
If it was fine you do not need to re-clock it.
Re- clocking it is when you take the bolts out of the tork converter and turn it 1 bolt hole either way and re-bolt it to the fly wheel. it helps if the tork converter is out of ballance.
And the other part about the power issue. Try to blead the...
My M1008 gets about 14 mpg city and about 15 to 17 at 55 to 60 mph on the high way.
And about 4 hours off road .""Stoping, going, 4H ,4L Mud, Hill Climbing,Ect...""
If it runs good and you like the truck Fix it.
If it was mine I would fix it. I would cut the top off, Reweld the new used top on and replace the driver door and put a windsheld in it.