Search results

Just an FYI. In a former life I did a lot of wiring and one of the products I came accross was this shrink tubing that had adheasive inside. The product is made by 3M and I can vouch for this stuff. Besides the obvious use for wiring, it can be used to do things like insulate the shank of a...

cat This is the other kind....

There are two kinds, but I think he is refering to a catalitic converter.

I think that if you remove the injector you can retrieve the piece with a rod magnet. I have not done this myself.

Thank you! I may do just that, but I'll have to wire them in different due to size. (not electrically different)

I am desperately trying to get my XM211 out of storage and home so I don't have to scrap her. I got her running again and she runs just fine, but the batteries are in bad shape. If I slave start her and then pull the slave connection she dies.. I am trying to figure out if it is just the bad...

Prayers inbound!

Just a word of thanks to CUCVRUS for all the helpful advice that he has given to his SS brothers. I for one am truly grateful.

Thank you very much!!!

Has anyone had issues with these filter screens? Any tips on cleaning them?

Thanks! Yep that clears it up. That's the right one. Thank you very much!

It seems like there are only 2 tube connection points on the picture. Maybe I am missing something and there are really 3.

Brake line T Thanks Juanprado! I think I got the wrong number then. I'll recheck. This is what I get from the 20P: PAOZZ 4730-737-3252 CONNECTOR,MULTIPLE: REAR BRAKE LINE A EA 2 * * * * 109 41 7373252(19207)

How do I go about finding the specs on this part, which is a 3 way brake line connector that sits on top middle of rear axle. Feeds the drum on either side of the rear axle of M54A2.

Thanks! I don't even know if I have a leak, or it's just air in the lines. All I was told is that the pedal went to the floor with no resistance. I was hoping that all the hydraulic brake lines were all the same size. Now I know that they are not.

I have to go work on my brakes in the next town over where my truck is and want to go prepared. What size is the brake line? Thanks a bunch!

Thank you very much!!!!

My XM211 is in another town so I can't just walk outside and look. Are all the brakes the same? Do they all have 2 wheel cylinders and thus 2 bleed valves? Which would mean that there would be a total of 12 bleed valves plus one for the air pack for a total of 13 bleed screws for the truck...

I went to try to start up my XM211 this morning. It has been in storage for a few years so I didn't have any great expectations. I hooked up a slave cable from my M1008 to the XM211. It took a while for the fuel to make its way but then it started up and stayed up. Pretty smooth for an old...

Is the GM training manual 16015.05-1C available as a pdf download? Thanks!