Search results

I'll second the above. This is a MUST DO. The relay is now made in China, and I already went thru 2 of them. Luckily it didn't stick closed. Don't put this off. The amount of damage that is done is really bad. Bruce

Check the water pump. My XM211 water pump died on its first trip. Spectacular steam coming out, I almost had a coronary. Bruce

steel soldier member banned for not following rules are you going to be next?

Thanks to everyone who responded! I now have one on order. Bruce

That looks good! I have a NOS heater so I am set on getting the adapter. There is even a thermostat in the s-250 that works with the heater. Thanks for the pic! Bruce

Thanks, that's the one I have. This one requires the 5gal gas can to be inverted. The one I am looking for has a pickup tube going down in to the can just like the pickup on a vehicle tank, but without the pump. Pump is in the heater. Thanks, Bruce

Has anyone ever hooked up the heater in the s-250 to the 5gal can mounted on the bulkhead just to the left of the door? The heater has its own fuel pump and there is a fitting on the bulkhead just below the 5gal can so that a hose goes from there to the 5 gal can. My problem is that I cannot...

Thanks guys, This really helps alot. I just got a old prisim type coolant tester so I can test the end result, but I hadn't thought about the issue with distilled water. I have to do all my own maintenance and help like this is really incredible. Bruce

I agree with you regarding the gaskets Jeremy. The original coolant was disposed of when I replaced the radiator, but there probably is still a little in the system. Your idea of drain, fill, run. repeat until clear, then add 50% antifreeze sounds like the way to go. This takes care of the t...

I should have specified that it was for my M1008, that's why I posted in the CUCV forum. I replaced the radiator about a month ago and bassed on some advice here I put some detergent in the water when I refilled. I now want to flush all of that out and then put water/antifreeze mix back in...

Thanks Patracy, for staying on top of things! Drool or not... Bruce

Can someone please point to the section in the TM's that discusses how to flush the complete cooling system. So far all I have encountered is how to drain the radiator. I know from civi trucks that the thermostat will screw things up. Any tips would be appreciated, Thanks, Bruce

search for Lunette ring lock in tools for sale in the classifieds or just click on the above.

Here is the company that sells all the connectors you ever want to buy for your mil vehicle: http://www.amerline.com They do have minimum quantity buys, but they are the real deal and very high quality. I am adding this here since the link in my previous post went away and someone requested it.

Has anyone mounted cameras in the cat's eye blackout slots in the back for use as a backup and trailer hookup guide? Bruce

Ok Kenny, stop trying to weasle out of paying your dues. We're watching you now. The Colector

Missed the previous posts for some reason. disregard. Bruce

Where can I download a TM 11-5820-898-20P? also the 10 and 20 Thanks, Bruce

She is a keeper! Don't ever let her get away! The truck sounds good too. I have one of each, and I am not about to let either of them go! Have fun with them! Be sure to get a comfortable seat for the passenger side as well as good ear protection. Consider a VIC-1 setup so you can comunicate...

doghead may have some 5 ton shear pins he could sell you. Don't know for sure. Bruce