Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
My wait light didn't work... I could hear the relay click inside the EESS and the light would flash for an instant...... never acted normally.
I bought a new EESS 12446779, 6110-01-395-9585 and a new glow plug temperature sending unit 12338772, 2920-01-175-7214... and a wait light...
Installed...
The fuel line hoses that enter and exit the fuel filter/ water separator on the M998....
The inside diameter ID of the supply house and the ID of the smaller exit hose?????
I'm assuming the supply house is 3/8" ID
Trying to plan for the filter relocation. Thanks.
I got a pair of 24volt high intensity headlight units 7" diameter. The three plug ins are in a upside down pyramid shape... Upper left, Upper right and bottom.
Wondering which one is hot, low and high beam. Thanks.
I understand the cargo partition divider keeps objects in the "bed" of the HMMWV from flying up into the passenger compartment if you stop suddenly.... However even if you seal the bottom and edges with, say silicon, rain water could still get into the passenger compartment because the rear...
Looking for opinions on my idea to relocate the fuel filter assembly.
Thinking about relocating the fuel filter assembly to the vertical wall section right in front and below the windshield washer tank. Looks like it will have plenty of tire clearance.
No problem to extend the fuel lines...
My transmission cooler developed a leak on one of the external loops. (M998). It lays on top of the radiator. Can these be repaired like a regular radiator? Braze, soldering???
If not, are there alternative transmission coolers out there??? The one I have has four hose attachment points.
Thanks.
I've searched and still cant seem to find a final answer... Two questions on M998
1. If I want to drain the water separator is the engine running or not? Just Crack the valve and drain till fuel is constant? I don't want to get air in it.....
2. I have no problem getting the fuel filter off and...
I'm about to buy a 1996 M998 four door that went through the West Virginina Reset program in 2008. Anything to be aware of it concerned about. It has the updated data plate on the drivers door. It has a 6.2L motor and 3 speed transmission. Is this still OK? I didn't know if 100% were...
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!