Search results

I have one pair left.

Here are the mirrors.

Another option is "Corn Head Grease". Go to John Deere and they know what it is. Used on high speed gears on the combine head. Thicker than the 90wt but not as thick as wheel bearing grease. Will not leak as bad if the seals are not keeping the 90wt in.

I have a parts truck with a good set here

Re: RE: Height of Ring Mount Above Cab? New one for me. What is the plate that bolts to the top of the cab? When I had my ring on before I used all 3 mounts and it was about 6" above the cab. Any one know where to get the "U" bolts? I need 10.

I have 2 left handed axe and on shovel. I also have some right handed ones too.

RE: Re: RE: Re: RE: thanks I have never been into a pump or even taken the lines off of one. What seals the injector lines to the pump? On my new truck I have fuel coming from around the injector lines, I think.

There have been a few threds on using the 15.5's / 395's on stock rims. I tried and kept pinching the tube and it is a B***H to get the lock rings on. If you could compress the tire it would work better. They might crown some in the center but if you keep the presure low it should not matter...

Here is one way to do it if you want to go with 46" tires. Not near as hard as it looks. http://www.steelsoldiers.com/index.php?name=PNphpBB2&file=viewtopic&t=8666&highlight=15+5s

He is. I know he was looking at a yoke off of a NP200 and a good whack with a hammer to make it fit. Not sure he has the found the right combination yet.

Check with Barrman. He was looking at changing the yoke on the deuce tranny I think.

Try this for some info http://www.jpmagazine.com/techarticles/drivetrain/154_0509_spicer_3053a_transmission/index.html Let me know what works. Mine is planed too.

I have taller bows on my truck. Thebows are about 13" taller at the center than regular deuce bows. Will a FMTV 12' cover work? I think the FMTV covers are taller than the deuce, am I right?.

I just got 3 to finish out my bed. I will keep looking.

20 tons at ($210 per ton) ($0.105 per hundred) = $4,200. That is not taking out for cutting up and shipping. Unless you are have a scrap yard yourself I cant see scrap bring $0.25 per hundred.

Metal or fiberglass? send me soe pic's sermis465@hotmail.com I have a friend looking for one. He just got a fiberglass but wanted metal. Armored John bought my M37 and might want a top too.

I just like the gear shifter boot. I like the heat in the winter from the motor but in the summer, 130+ comming in gets rather warm. Anyone have one of the boots thay want to send me? "I've installed Builder77s 1970XE 5-Micron filters" Does this use the same base as JA Tonka but with a...

RE: Adapters M715, now that is an idea. How much?

RE: 3053A bellhousing Well I had another idea. The old motors had the starter mounted to the bellhousing. The newer motors the starter mounts to the motor. I might be able to use my current flywheel and starter with the old cast bellhousing if I can adapt a clutch fork.

RE: Re: RE: Bellhousing issue I need a flywheel for the 13" clutch to go on my 350 with the one piece rear main seal, anybody know which one will work?