Search results

EcoHubs.net. Give me a call or pm. Happy to answer any questions.

I was wondering if switching voltage inputs has worked?? Like this image shows?

Working on my second truck. The cab noise when hitting small bumps was bad! Squeaks, thumps very annoying noises. I have already installed new mounts and replaced the rubber disc at the cab latch. So I decided to try lubricating the hooks and pins on rear cab mount. A finger full of grease...

I have had a compressor that cycles too often intermittently. Today was the day to chase the air leak. This truck will hold air all weekend and then some. I rarely hear the buzzer on this truck. So I made up some fittings to fill thru the air drier. The leak only made a little noise at...

I’m curious why you chose the sealer you used? Not exactly what is called for in the instructions. Let me know how it works. Mike

The half plugs are the same throughout all that I have shipped. I didn’t know the tolerance was that clos with the drum. I guess I should add to the instructions to push the half plugs in as close to flush as you can. Sorry for the Problem.

The transmission seems to relearn very fast, just take it out for a drive . I used to go thru the relearn process but I don’t think it’s necessary. Mike

Yes there is a market for the outer hubs, put them in the for sale section. I sold a set recently. if you pm me I will tell you what I got for them.

When you remove the outer gear reduction units, mark them left front,right front,right rear ,left rear so they go back on in the same location. If you ever want to!

I’m wanting to go this weekend and setup an Eco Hubs display… Is there anyone going with a Lmtv with Eco Hubs installed? I would like to have a demo truck..for Eco Hubs. Thanks. Mike

Yes you leave the shims in place for two reasons. First if you mark the gear reduction units when you remove them. You don’t need to re shim the units if you reinstall them. Second if you use the Delta Locks, the shims space the lock further onto the splines of the axle tube.

For those not watching the vendors forum, we have Free Delta Locks with the purchase of Eco Hubs. Offer thru August! Thanks for your support! Use promo code “Delta Locks 4x4” or “Delta Locks 6x6”

Thru the end of August we are offering free Delta Locks with a purchase of Eco Hubs! Order on the web site EcoHubs.net. Thank you for your support! Use promo code Delta Locks 4x4 or Delta Locks 6x6.

Wanted to post that Eco Hubs have free shipping to the US for the next couple months. Includes Alaska! Use promo code “Steel Soldiers”. We have good stock and can ship fast. Thanks for the support !

Yes they are tapered lug nuts. In a perfect world they should center and be fine. I had one wheel that was damaged at the lug nut tapers from not tightening correctly. it’s now my spare. I use the nuts shown to make sure the wheel studs are true, then tighten the tapered nuts. These...

Im assuming you have stock steel wheels. If you do, remove one or two nuts that hold the wheels together . look to see if the studs are in the centre. If not the whole wheel is off. 1/16” is a lot when the wheel /tire weighs 300 lbs. When I do mine I use steel alignment sleeves over...

For the next few months I’m offering free shipping on my web site EcoHubs.net . Use promo code “Steel Soldiers. (USA only) Thank you for your support! Time to get your Eco Hubs!

Yes that’s to clean the rust and years of RTV out of the holes. They must be clean all the way to the bottom of the threads. The install is easier than it seems…. Make sure to put the adapter plates on correct. The smaller disc goes into the hub to help center it. Call with any questions.

Eco Hubs! Cut your driveline speed in half. Greatly reduce noise. Increase fuel efficiency. I know sounds like a sales pitch! It is! Eco Hubs on special thru the month of May, you get free Delta Locks. ,

For the month of May I’m offering free Delta Locks with the purchase of a set of Eco Hubs. 4x4 and 6x6 Visit my web site EcoHubs.net and use promo code “Delta Locks“ on a 4x4. And use “Delta Lock 6x6” for a 6x6. Thank you for your support!