Search results

I find that an issue / challenge with UPS units is that when they have tight limits on acceptable input voltage/frequency, the droop upon loading can cause the UPS to decide the voltage / frequency is out of range, and drop off line, as @Toolslinger posted above. Then you have a rinse and repeat...

I think that it rarely hurts to replace an old capacitor like that, especially in a unit of unknown history, and always good to keep a spare on hand. If it were me, I would test load it after changing to make sure everything works. Capacitors aren't the most reliable parts in the box in my...

How bad did the air filter look? FWIW: After probing around to get a sense of the range of temperatures, and finding the areas that are the hottest, I try to keep the IR temperature probe perpendicular to the location I want to measure on the manifold, at the same distance to the manifold, the...

There's always some new paint...😉 Congratulations on the new to you generator. All the best, 2Pbfeet

Do you have a photo of the wiring behind the control panel, and inside the cube that you can post?

Welcome to the '803 club. Yes there are a zillion #10 nuts in awkward places, and I think as it is not desirable to have them vibrating around, I think it is important to find them all. Magnetic pickup wands and a vacuum with a crevice nozzle helped me. Bonus: I found fasteners that I was not...

I agree with you that they usually are remanufactured engines, but the document that @kloppk posted lists remanufactured or new. All the best, 2Pbfeet

In addition to @Mullaney's comment above, and this is may sound horribly tedious, but I think all of the wires and wiring ought to be checked. The fully pegged fuel gauge is suggestive to me of a bit erroneous wiring, including checking on the solenoid wiring and function. All the best, 2Pbfeet

Can you elaborate on the "rubber band" question a bit? The original hose is rubber with a woven outer cover, so stiff compared to say clear vinyl tubing that is not usually diesel compatible. Generally, if the outside woven cover is wet or weeping, the hose is cracking, but the woven cover can...

Is that braided hose actually attached? In one photo the hose looks almost broken. If you can tightly fasten the hose on, great. If not, I suspect you need a new return hose. They do age, crack, and weep.. I like the spring clips as the pressure on the hose is uniform around the circumference of...

That's some collection of custom vehicles that you got to experience! Wow! All the best, 2Pbfeet

That looks like a new engine was put in. Lucky you! All the best, 2Pbfeet

@Scoobyshep funny! And not the first time that I have heard a story with regards to improving the effectiveness of the ground rod. The manual above suggests a salt solution poured around the rod, though I have read elsewhere that Epsom salts (MgSO4) are more effective and more persistant. EDIT...

👍👍 Personally, I prefer to learn from someone else's errors if I can, but that doesn't stop me from making lots of my own.😆

+1 on corded. I have an inexpensive SDS adapter. It works a treat. I also have an adapter for a demolition hammer as well when a little more persuasion is needed, as the rocks here are soft, though the gravel can be quite hard in places locally. Though I would say standing up on a ladder with...

Is your unit a Tier 1 or a Tier 2 reset? The one under the oil filter is usually the National Security emissions exemption statement. Not having a remanufactured label suggests to me that whatever caused the unit to be sent for reset wasn't something significant to the engine, per the document...

Thanks, and posted in TM Uploads. All the best, 2Pbfeet

The manual is from Marathon for their smaller light towers. "These are small, capacitor regulated generators. The most common model numbers include 201CSA5411 which is a 6kW unit and the 201CSA5420 which is an 8 kW unit." Table on page 6 lists parts for and covered units, generally 6-10kW. Also...

I'd be happy to, but I didn't think that I had the privilege to do so. Where would be the best location as I don't know of a Marathon light tower military version. (My ignorance, I am sure.) All the best, 2Pbfeet

I think that lack of oil might behind Generac's call for once daily checks on oil levels on their air cooled units. All the best, 2Pbfeet