Search results

Picture 32

Is this unit from Gov Planet Item Number 13278687 If it is i see in the listing pictures the air filter has been removed and the oil line for the turbo appears to have the Banjo bolt holding it on is missing. Just trying to get a feel for what i see

https://www.steelsoldiers.com/threads/mep-802a-and-mep-803a-coolant-overflow-cap.148422/ https://www.oreillyauto.com/detail/c/dorman-help/dorman-help-coolant-cap/mtm0/82594?q=82594&pos=0

Thats bad. One thing to note is the solargizer does produce voltage so make sure that is not touching the case. Although not a huge amount of voltage it can give some stray juice. When ever i ship Generators i have specific notes about not stacking items on the unit because they are all...

You said the panels were damaged in transit. what exactly happend. Do you have something grounding out. I had a 1030 with a messed up starter that created a dead short in the 24v system, but interested to see more pictures of the damage and what it looks like inside. The screen should not...

Start with the Technical manuals at the top of this page under generatorshttps://www.steelsoldiers.com/threads/mep-1050-1051-ammps-15kw-6115-01-561-7634.158377/. I can tell several things from the screen that 1 E-stop is pushed, 2 reset the faults before you do anything and check what position...

The outside condenser with fans that you have in the picture i have the GEN 2 inside unit

I am 1 ac Condenser fan unit away from having all the parts for my AO AC unit can you give a model number for that unit you have there

Thats what they use at work, but i had not found one affordable enough to justify buying. Even at Auction they are pricey

h 10.3). Optionally, salt can be placed in the trench and then covered, which will leach into the soil whenever it rains. From the standpoint of effectiveness and anti-corrosion qualities, the salt types listed below rank as follows: 1) Magnesium Sulfate 2) Copper Sulfate 3) Calcium Chloride 4)...

I plan to use the rod driver adapter. that is made for the hammer drill, but good to know someone has used one.

I am looking at buying an SDS drill, Hammer, Hammer drill combo so that i can drill anchor bolts when needed, knock hydraulic lines free and chip concrete, but i also thought this might be a good investment for ground rod installation. since i frequently install and remove them for the...

Here is some light reading for you https://www.steelsoldiers.com/threads/field-and-sustainment-and-maintenance-2k-thru-200k-tqg-generator-sets.122965/

That is a reset unit, and i believe reman engine, make sure they are standard bore pistons before buying a kit

One of the problems i have had in dealing directly with SPX is minumum order dollar amount and x numbers of a certain item. So at least there are options

https://dpequip.net/shop/military-vehicle-parts/4320-01-417-2272-fmtv-a0-hydraulic-reservoir-tank-bae-350887-power-unit/

After you get it running looks like it will need a good high load run, i see signs of Wet stacking,IE the black goo coming out of the exhaust manifold. But obviously get it running first.

more than likely you have plugged injectors if the fuel was as bad as you have described. Are you getting any fuel from the return as you crank it over?

Its just a yamaha i1000 gasoline generator with a ether bottle strapped to the back to get it to start on Diesel. If your float needle is sticking in the carburetor it will also cause the fuel to flood over into the oil

Ok going to revive this thread. After being disappointed by the price of that compressor going up to 1900 dollars i was about to just pull the generator off. but i ended up on the GP auction buying 3 new Compressors so i will be getting back on this and hopefully have cool air to work on other...