Search results

Howdy, All the manuals you will need to do anything with your units are here on Steel Soldiers. MEP-803A, All the TM's you need MEP-802A and MEP-803A manual information MEP-802A manuals you should have TM 9-2815-252-24_____ Diesel Engine Model DN2M TM 9-2815-252-24P____ Diesel Engine Model...

Further additions 1st Important Unit check! Do this before starting unit (y) Make sure your unit has the fuse mod, if not, bad things can happen. Quad winding fuse mod on page 29 Reset Manual here PDF page 29 has the MEP-8xx 5kw and 10kw fuse mod. It also has the MEP-8xx 15kw and higher...

Howdy, MEP-802a and MEP-803a use all the same filters and such MEP-802A ONAN DN2M 2-cylinder engine (Lister-Petter LPW2) Liquid cooled diesel, aluminum housing MEP-803A ONAN DN4M 4-cylinder engine (Lister-Petter LPW4) Liquid cooled diesel, aluminum housing Oil Filter Spin-On (FILTER ELEMENT...

Howdy, MEP-802a/803a generator end bearing. Dimensions: 25mm ID 62mm OD 17mm tall/thickness Crosses to KML BEARING # 6305-2RS. The suffix denotes 2 rubber seals. They are also available with metal seals.

Howdy, MEP-802a/803a Air Cleaner Assemblies Here's a few more PN's in case anyone is missing parts for your air filter housing. The housings and parts from Donaldson are still available new on Amazon, Ebay and the internet in general. Donaldson housing assy complete is a FWG054-2619 (...

Howdy, All the relay's are the exact same, EXCEPT, the far left 1st relay is a switch. MEP-802/803 relays

Howdy, While you are in the area... Check out your fuel fill collar. When people fill up the fuel tank to just about running out, it can leak from a deteriorated rubber. So a full tank can leak from a weak upper tank well nut (fuel return line back to tank) and from the fuel fill collar.

Howdy, I had a unit which had a small leak. Soldier A thought he would fix it, and tightened the filter like King Kong. Still had a leak. It got auctioned off. I got the filter off and put a new filter on. Still a small leak. I took the whole assembly out, and right on the top is like a small...

Howdy, He does not need a filter. He needs the aluminum base the filter screws up onto. In his picture, the entire assembly is gone.

Howdy, Hopefully someone is selling pieces from a parts machine. from a 802 or 803 works. You want the water/fuel spin-on filter base? Its a good chunk of aluminium.

Howdy, Cleaning the carbon, and wet stack issues is really running it at 100% for hours. The 130% is only for like 5 minutes. You do not want a prolong running over 100%. Any time a unit is run over 100%, it needs to be watched, listen to, and totally working good. IR thermometer readings...

Howdy, I do not know if a part # was assigned to it. They had it all as a complete replacement kit which was a reset item. It was made to replace the square Facet pump. MEP-802/803 fuel pump The 800 series TQG has 2 different fuel pumps. The older style is a square Facet electric fuel pump...

Howdy, Even more reason to post up the found info.

Howdy, Why not just buy a new one?

Howdy, OK, with some clarification. a 40ft container, a MEP-803A as the only power source. Movable to area where it is needed. Then, that would be field style, only power source, drive a ground rod, connect to generator, bonding link in place, that will be your only grounding source. since you...

Howdy, The bonding link is the samll 3/4" by about 3 inches long flat bar connected there next to the nuetral lug. You want only 1 ground location. The Service panel which you are connected to, is it a fully installed service panel? and the ground neutral are bonded (the 2 are connected) in...

Howdy, Before you get to carried away... The freezer will have some vital information about its power requirements. Somewhere there will be a tag. The tag will tell all about the motor, the power it needs, and a LRA number. maybe even saying motor 1hp, 208-240 LRA 80 running 30 A lot will also...

Howdy, I had the privilege to meet Ron in person. At first we exchanged screen names to know who each other was. I knew Ron as 73m819. There might be many sides to Ron. I would say there is a softer side of Ron. While at my place briefly, He really liked all my barn cats.

top off 2019

Hello, I am speechless. There are no words for how quickly things can change. Prayers for the Harris family. Prayers for all involved.