• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Search results

  1. doghead

    A muddy resistor bypass - overkill is a GOOD thing!

    I'm surprised you did not connect directly on the front battery positive cable, to lessen the load on the inter battery cable. When I redid my battery cables, I actually moved the 12v wire(smaller one) to the front battery terminal, for this same reason.
  2. doghead

    New good quality block heater?

    Ether works below 10F. If your oil pan gets heated, the oil in it will get heated. That warm oil will heat the whole inside of the engine. The pan gasket does not factor in to this in any way.
  3. doghead

    Cold weather gauge issues or actually overheating?

    I've seen the condensation in the gauges before. I would not say that is the issue. I'd wager on the sending unit or a bad wire, or bad ground.
  4. doghead

    Will STANDARD medium towbar pull LMTV?

    http://www.steelsoldiers.com/showthread.php?124109-LMTV-towbar-pin-SIZE
  5. doghead

    Will STANDARD medium towbar pull LMTV?

    Searching the sight, says yes.
  6. doghead

    Magnetic block heater ?

    http://www.google.com/cse?cx=partner-pub-4015606617893285:1751224275&ie=UTF-8&q=magnetic+block+heater&sa=Search&ref=www.steelsoldiers.com/search.php%3Fsearchid%3D3628773#gsc.tab=0&gsc.q=magnetic%20block%20heater&gsc.page=1
  7. doghead

    Magnetic block heater ?

    I'm surprised nothing came up when you searched "block heater".
  8. doghead

    Brake Light Switch

    TM 9-2320-365-24P figure 152. It's on the treadle valve.(above the brake pedal)
  9. doghead

    Dana 60 front w/ crossover steering?

    Pics?
  10. doghead

    Dana 60 front w/ crossover steering?

    What kind of cucv are you talking about?
  11. doghead

    Glow plug relay issue.....again

    update?
  12. doghead

    no start , i think some how i killed all the glow plugs and the resistor bank

    http://www.parttarget.com/5905-01-193-7212_5905011937212_5330011937212.html
  13. doghead

    As new as new can be surely you can see.

    Be careful, if all your bulbs were blown you may have a voltage regulator problem. This can happen if you run with a dead battery or no battery or just a bad connection.
  14. doghead

    I'm worried about my Deuce freezing tonight

    Did a search for you. http://www.steelsoldiers.com/showthread.php?125116-Coolant-heater-hose-location&highlight=correct+heater+hose+location+picture
  15. doghead

    I'm worried about my Deuce freezing tonight

    Not really... http://en.wikipedia.org/wiki/Core_plug
  16. doghead

    Deuce won't build air pressure when cold...

    Let it run for half an hour, it will warm up.
  17. doghead

    I'm worried about my Deuce freezing tonight

    You could always drain it.
  18. doghead

    I'm worried about my Deuce freezing tonight

    It probably mixed and will be fine.
  19. doghead

    I'm worried about my Deuce freezing tonight

    Your heater is plumbed incorrectly. You will never get to your thermostat temp with it like that. Wind chill has no effect on metal (your engine).
  20. doghead

    939 heaters

    I would simply add ducting to the intake of the fan and draw the inside cab air through the fan(recirculate).
View older results
113,868members
166,938threads
2,350,448posts
10,137online users
Top
✖
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks