• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Search results

  1. NDT

    M37 Ignition Wires

    Honestly I have had reasonable luck just stuffing the wire in the cap by folding the wire core back a bit on the insulation. Goes without saying this does not work with resistor core wires.
  2. NDT

    M37 Ignition Wires

    This maybe: Standard Motor Products ST22 Standard Motor Ignition Wire Terminals | Summit Racing
  3. NDT

    1952 M135 4.9l GMC inline 6 oil filter?

    Oil capacity should be on the data plate in the cab. It's a lot more than 6.6 liters. Like 10 quarts. TM you need to read: More M135 TM's | SteelSoldiers
  4. NDT

    FMTV/LMTV - International expedition

    Several YouTubeers doing this. All seem to be really nervous about rire failures in the middle of nowhere.
  5. NDT

    Coolant came out of Cylinder Head when removing Glow Plug

    Looks like exploratory surgery is unavoidable. Cracks or blown head gasket.
  6. NDT

    New From MN - M35A2 Engines

    You came to the right place. This site will require you to list these in a classified ad, to do so you must be a member. Each ad should have many pictures including what is printed on the inventory tag on the engines. These engines fit M35A2 “deuce and half” trucks which are still used by...
  7. NDT

    Coolant came out of Cylinder Head when removing Glow Plug

    More info needed. Is it water or antifreeze? Have you been driving your truck around and then this happened? Did you just win this at auction and the air horn was removed, allowing rain to enter the engine?
  8. NDT

    P6 thrust bearing dodged a bullet…

    So your aluminum bushing you made is to duplicate: "composite thrust washer 3 times as thick as the A or B roller thrust bearings" Extra points if you share the dims of the bushing you made .... and which alloy
  9. NDT

    P6 thrust bearing dodged a bullet…

    Omg the Allison part costs that much???
  10. NDT

    P6 thrust bearing dodged a bullet…

    If you cut the bed away to allow cover removal, how many hours are we looking at to do this repair? Do we have to drain the fluid?
  11. NDT

    Just bought a new project. 1961 M422A1

    Is it a nice one to start with? I have some wheels for it if you need some.
  12. NDT

    TX HMMWV Rhino Tire Carrier support bracket

    As pictured. $30 plus USPS flat rate box shipping.
  13. NDT

    CUCV II alternator question

    Yes I believe it is located in the unit itself. Pics: CUCV-II (CUCV2) Dually | Page 4 | SteelSoldiers
  14. NDT

    CUCV II alternator question

    It has a fuse that can blow and then the second battery does not get recharged.
  15. NDT

    CUCV II alternator question

    Do you have the stock setup with the 12-24 converter behind the seat?
  16. NDT

    WANTED: Compressor tank and brackets for M1031

    I parted out a wrecked M1031 (Able Body Co) and kept all the steel pieces and doors, I SHOULD have that tank somewhere, let me look, it will be a few days.
  17. NDT

    1952 M135 4.9l GMC inline 6 oil filter?

    Fram C-31.
  18. NDT

    Transmission Circuit Breaker keeps popping

    Suggest you use the wiring diagram in Supplement 7 and put all the wiring back to stock.
  19. NDT

    Transmission Circuit Breaker keeps popping

    You have a miswire or bare wire touching somewhere. Go over the connections in the battery box carefully.
  20. NDT

    PRC-47 Value?

    So a plain 47 is valuable after all?
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks