Search results

Matt, It did look good at the show!!!

Thanks for coming all the way from CA with your Trucks and Trailers!! Good to see you!!

Ok, Did you bring a truck?

Sam, I did not see you there, Why did you not like the show? We all had a great time!!

When I tow a M939 I like to remove the drive shafts off of the front and rear. Just make sure your axles have gear oil in them. It is just what I like to do. Does not take that long with a impact, they are 9/16" bolts. Good luck and be safe!!

Welcome to AZ.

Looks very good!!!!

Well I had a air leak that started on my M929. Has anyone came up with some good o-ring sizes that works for the valve? I have read lots of post and it looks like a lot of people have not had good luck replacing the o-rings.

Should be a great show with great weather!!!!!

My limited use of tire chains is that bungee cords or your friend.

Looks great!!!!

I think it is 1/4x20.

Here are some pics of the j-bolt I used. It already had the lower bend in it and I did the lower one in the treads.

I think you should be fine as long as you do not use them for a long period of time.

I went to Ace Hardware and found a J-bolt that already has a bend in it and all you need to do is put one bend in it, work great. Sorry do not know the P/N number. I will get you a pic after it gets light out.

Looking good!!!!

If you want you can bring your truck out here and leave it on the jack stands as long as needed. I can help you take all the tire and wheel into town. I think the black would be ok, But I would like the green better so 1 or 2. You could get some paint mixed and put in cans for the hubs at a...

I think that would work with the plasma, I have one that is like that made by Miller for the Plasma.

I have been using one and I like it.

No I move it from truck to truck.