Search results

+1 Sent from my iPhone using Tapatalk

Wow [emoji33] That’s expensive for what it is.... Sent from my iPhone using Tapatalk

Anyone out there find a source for canvas/synthetic covers? Easy enough to make with a commercial sewing machine (which I don’t have) https://transhield-usa.com/product/navy-5kw-mep-802a-generator-cover/ Transhield may have one... Sent from my iPhone using Tapatalk

Interested in a similar setup. I’ve been debating installing a Nema plug for a typical portable generator to an interlock breaker feed at the panel. Sent from my iPhone using Tapatalk

Love the turnbuckle tensioner mod Sent from my iPhone using Tapatalk

Finally reassembling the covers. Does the TM show what screws go where? Sent from my iPad using Tapatalk

Just ordered some hardware for replacement, great thread. Thanks.

I should take the time to relieve the sheet metal before re-installation. Sent from my iPhone using Tapatalk

Replaced both drain and return wellnuts on 802A today. The return was easy to access and fish though with a wire. The drain was not feasible to tighten due to interference with the sheet metal. I had to completely remove the radiator and supporting structure to R&R the tank. This was a huge...

Great thread and write up. +1 MEP 802a with this leak. Ordered a pair of bulkhead fittings today. Sent from my iPhone using Tapatalk

Love to see someone waterjet valve cover rim reinforcements Sent from my iPhone using Tapatalk

Any tip on transferring emissions / compliance stickers to new covers? Sent from my iPhone using Tapatalk

Need to do the same... Sent from my iPhone using Tapatalk

Bummer... [emoji2959] Sent from my iPhone using Tapatalk

I’m considering taking a role in California. But I have a nice M998. I understand the California no longer registers these vehicles. Love to hear the team experience on this. I prefer not to have to sell my vehicle. P.m. if needed Sent from my iPhone using Tapatalk

Did you use a multimeter to test that you actually had power at the three point contact switch before putting the windshield back up? Sent from my iPhone using Tapatalk

MEP-802a Sent from my iPhone using Tapatalk

Picked up an accessory from GovPlanet. HMMWV rides really well with 900# in the back. Sent from my iPhone using Tapatalk

Looks like body sealing glue from the factory. I used a razor knife to carefully remove the glue seams. Sent from my iPhone using Tapatalk

Yes, the coil spring diameter is noticeably increased. So far so good on road. Sent from my iPhone using Tapatalk