Search results

The tank just has two baffles in it, if that is what your asking? I would not think the air bubbles would be a problem with more then 10-15 gals. in the tank. You maybe getting air in some other place.

Starting to look like new!!:)

Nice looking truck!!!

You need to pickup the truck first then send in for the SF-97. A Bill of Sale will come with the SF-97.

I just checked and the spacing is not the same for the dump seats and cargo trucks. Will not work.

I am the one that did the post you listed and I do not think the Dump truck seat will work in a cargo truck (to short for one). I think the leg spacing is not the same. Also the seats just unhook from the back and then hook into the bed of the dump. I will check the spacing this morning.

I have a Fluke also and it has been banged around,and dropped for 25 years.

Here is a post about the problem I had with my M923A1 fuel tank. http://www.steelsoldiers.com/showthread.php?79327-M923A1-losing-prime&highlight=fuel

They should be the same, but the M936 has a PTO on it, that can be moved over.

Welcome to the site, a lot of good info. here and help.

Do you have them for sale or how did you do it?

The 11.00x20's do not do so good in sand. Just put it in 6x6 and air down a little and you should be fine. Most of the problems will come when you try to turn.

That is going to be over 5k with not trailer brakes.

WOW glad your ok, not much left of the tire.

I just redid a set of troop seats on my deuce so I know how much work it was. Very nice job!! When you get the powder coat number could you post it?

Let us know what you come up with. My wrecker has the Parker motor on it and I have had that rebuilt.

Very nice looking truck!!! Have a safe trip to pick it up!!!

That is going to be a 1983-85. You can check with Carnac in his post. http://www.steelsoldiers.com/showthread.php?118697-2014-VIN-Info-Thread&highlight=

Nice job and a good idea!!!

Well the light came on in my little brain and I have no problem now. see pics. I unhooked the seat part and moved the seat to the holes in the bed. aua That is why the seat part unhooks and there is holes in the bed!!!!aua