Search results

Gimpy has the correct tubes http://www.steelsoldiers.com/showthread.php?120665-9-00r16-bias-ply-tubes&highlight=

Stop by and see gimpyrobb and I and get a Free P38 can opener. I can bring a new in the crate 16X16 tent with used frame for $800 . I have a used BaseX desert 305 18X25 with ends and floor $900. I am only bringing the tents if there is a buyer.

Roof ring was for a gun mount, the rear bump was for NBC and field gear for the crew.

Look like Hella's, not seal beams.

Yep one of the big weird shape pieces was a door wall for the command post, the other big loose one was an extra end wall for the base X. Again thank you for the help and 2 of the heavy lights were NOS!

Two days after my maintenance tent disaster I got a call from Aswayze he was out at Rkrug place in western Ks and did I want a sweet deal on a Base X 305 decon tent. It is mil issue but instead of green or tan they are off white and came with floor, liner but no end walls, repair kit or stakes...

It did that to me and I restarted puter and then it worked fine.

Any numbers on the frame that go vertical are the part/code#'s for that side of the frame. Vin's run horizontal and are not as deeply stamped as the part # and a lot of times sanding or stripping is the only way you can find it. Mo MV Man has a great picture #1

Nope due to OFAST being 21-22 June and the MVPA National in Louisville 25-28 I and several others can't do back to back weekends. We are still working on either a May or Fall date for this years KAMO (Kansas Arkansas Missouri Oklahoma) Rally that will work with Dwayne, owner of the D-Day...

Welcome from Kansas, also the LO lube order tells you were to grease,oil and lube.

Wash rack and maintenance time! Skidders are beasts it's amazing on what they can do, glad he came along and got you out. I went ahead and changed the thread title a little.

That plug would work for dumb charging but not for slaving, low amp plug. Not all plugs are the same there are high and low amp plugs the J-6362/U 24V is low amp, if you hooked 2 of those up with cables and tried to slave a truck one end or the other would melt to the male plug.

A G26000 will work through the Nato plug, a standard 24V charger would work also. A gen 4 bank charger with a set of wires to each battery would be better.

Welcome, not really a history but at least you will find out the last unit that had it, follow the instruction in the first post. http://www.steelsoldiers.com/showthread.php?118697-2014-VIN-Info-Thread If you don't already, come down to the Iola show in August, I drive 12+ hours to it and it's...

If you look down the page on the left you will see similar threads on these trailers Bounce may be because of air pressure, what are you running, mine are at 20psig The surge has been enough brake for my use so can't comment on that Rust since there is not a lot of steel can be controlled with...

Here is a step by step for doing a Cummins 4BTA in one with original chassis and sheet metal http://imageevent.com/moosecreekmaple/m37project

Sorry no help on the 1070 but since you seem to be the only civi owner with a M1030M1 could you at some time start a thread on it with lots of pictures and performance. Thank you in advance.

Mine did the same thing in Jan, the only magnesium part is the snapped part and it's supposed to do just that. Knock out the roll pins on one side, pull the pin on the other side, put the 2 hunks back together and trace it out on oak use a band saw to cut them out. Make sure you remember how...

Good to know he is into customer service as Mike was. One of the best GL guys I have dealt with.

I have seen them a few ways I got 2 lots like this