Search results

I was thinking they were the same, but my A3 is a stiff when your trying to shift it. Do you need to put the trans in neutral to shift the transfer case? Thanks!!

That is my think also to paint the inside with the cans and paint the outside with a spray gun. Like the matching rattle can idea!! I put some parts out the the AZ sun today that I painted days ago and they harden right up. I did a IR temp on them and they were 155 degrees.

Good job on the repair!!

I have looked for the p/n for the A3 transfer case with out much luck. Is the A3 Transfer case the same as the A2? I know this sound like a newbie question!! New to A3's Thanks!

I have just been using the rattle cans for inside the cab.

Thanks guys, Maybe the AZ heat will be like an oven.[thumbzup] May have to use carc on the out side.

I found some old threads on this, but I was wondering if people are having the same problem still? I painted my dash and other things in the cab with Gillespie paint (rapco) and I have notice it is not getting very hard. I used 1 cost primer and two coats color and it has been about four days...

Tinwoodsman, I am doing the same thing to my Deuce. I am going to use the Semi-Gloss Olive Drab also. I look at the seat and I think I am going to just try to paint it all together. Good luck with your repaint job!!![thumbzup]

Carnac, Thanks for the assistance and help!!! M35A3 wo/w AM General a. 500601 same as on frame b. DDAE0793CR110 c. 2320013832047 d. Barstow, ca e. Driver side F104 3 pass side NCB07 In side glove box # NCB07 I found some paper work in the truck that it was posted at a Utah NG post...

Cesenatwin, I used Wix filters and they came with the right gasket #51133 and the Napa # 1133. I think Wix make them for Napa. WIX Filters : Filter Look-Up Hope this helps?[thumbzup]

Some great pics and work guys!! Thanks!![thumbzup]

Do you do transport other peoples trucks also? Like pickups at GL lots and transport them to were they need to go? Always looking for a good trucking company.

Looks like a nice ride!!!!!:driver:

I know it is hard to wait, I was like a kid with a new toy and could not play with it.

MY first EUC took about 45 days, the 2nd took 7 days and now the 7th took 10 days. I think it is just how busy they are. Just have to be ready for it to come back at anytime.:cookoo:

My deuce does that from time to time and I was thinking it was the starter relay, but it was not. Still trouble shooting the problem, but when I took the dash apart to repaint it I noticed one of the plug pins to the start button was not pushed in all the way. Not sure if that was it or not, the...

My deuce does the same thing. Push the start button and all I get is a click. Then you try it agian later and it works fine. I was thinking it was the starter relay. Thanks! Sorry I miss read the title, I was talking about a M35a2.

I could do some az and ca driving.:driver:

I bet you are right!!! My 4th is on the bottom of the plate and 5th is on top of the plate. Looks like a nice truck!

Looks great!!![thumbzup]