Search results

One exception to that spark ignited engines can't run backwards is the early 2 stroke gas golf carts. They ran the engine backwards to get reverse! I've only seen one and that one and it has since been sold due to issues.

The M939 number you could say is the base platform, then it breaks up into different variants. Ex. M923 cargo, M925 tractor, wrecker, long wheel base, winch, etc. Then the last numbers are variations in the platform, ex. A1 is NHC 250, A2 is 8.3 Cummins. There are so many simularities across the...

Way to go, I see you got the pics up!

Click go advanced, then manage attachments, add files, choose files, then choose the place your pics are (ex. drive E for SD card) select pic, and press upload. I normally don't do more than 2 or 3 at a time. And a good Internet connection is a requirement. Ones that cut in and out or are...

It needs some, I wouldn't pack it full though

I've put several on that in 6 months later they have a hole in one.

Yeah its a pain in the butt, the last one I did I ended up sewing the boot to the inner clamp with 5lb fishing line. And no it doesn't leak. One other thing I've done is to clean the axle tube real good and rtv the boot to the axle tube and then give it a day to set. You must use the grey high...

Great info

Remember to put some sealant on the outside of that retainer when you put it back together

The one in the retainer in the end of the axle tube? I used a big slide hammer, but don't use the fingers to pull it out. Use the block the 2 fingers attach to instead. You'll have to put it through the seal and then thread it on the slide hammer. It takes some force to knock it out. I have...

I used the valvoline red disc brake and wheel bearing grease for all the wheel bearings I do.

Guys this truck is one of the best vehicles I've driven on the beach. I've driven everything from Ranger's, Jeeps, 1500's, 250's, and 2500's. This thing handles the beach as well as any Jeep or Ranger. And with the setup I'm using it doesn't take much longer to air down and back up than any...

There is a thread in the 5 ton Hotroding section about turning up the pump in the 8.3 6cta also others about the nhc 250

I made a new air hose just to air this thing up, first of this week. It worked great. I used the clip on chuck so no more holding it on the valve forever.

Hey guys out this weekend on the beach at ramp 49 in Frisco NC. I dropped air to 35 psi the whole way around, left it in high, 6x6, and limited the Trans to 2nd. She marched right out there with no issues! I had to slow up as I was leaving my brother in the silver ram.

Someone at some point had replaced mine with plastic DOT air line. I threw it all away when I did away with the system.

I'm running up to 40% peanut oil in a 8.3 cummins cut with a small amount of gas

Good idea, I just didn't have a extra injector sitting around

Pics from last week's hay run. My kid brother driving it for the first time

Here's a couple options http://eriksmilitarysurplus.com/mitradcactro.html I think this one's the correct one. http://www.xm381.com/xm381/Civi_Trailer_Lights.html Good info here https://www.youtube.com/watch?v=OlI3T4EM_RA Might contact him to see if he has more to sell. Looks like he knows his...