Search results

Maybe 125psi at 175cfm maybe, I don't remember.

My pot requires a large compressor. The one I have been using I think is 175psi at 100cfm maybe, trailer compressor with 4 cylinder diesel motor. I have a small Harbor Freight maybe 30 - 50# that a 5hp would run. The small one is good for small parts, wheels, etc but would take for ever to do...

Post me a pic. Is this the flat type aboput 1/2" - 3/4" wide and maybe 2.5' long? If so I had a couple, my son has been playing with them if I can find.

180, sometimes helps on balance too.

I like my 350# pot but a 5hp will not even come close to running it. The smaller blasters wil work but will take a long time.

Here is a PIC of my modified top for access to the ring.

I used 24052 on my truck. The shine goes away a little with time. Here is the link on my painting project. http://www.steelsoldiers.com/index.php?name=PNphpBB2&file=viewtopic&t=14126&start=0&postdays=0&postorder=asc&highlight=getting+ready+paint

You could go with 395/85/20's or 15.5 / 20's. Ithink they are 46" verses 52" which should clear.

If you wanted to go tubeless you could use the combat bolt together style. These rims have the same back spacing as the lock ring but bolt together. I think I have 6 or 7 not spoken for if someone is in need.

Are these corners and short uprights for the deuce? I have some fiberglass uprights and the corners for the drop side but no bows. I have found 2 metal bows that are the same as the wood but made out of metal. I also have some metal uprights and metal bows I think came off of a 5 ton. They go...

I can get you a pic of the plate but not mounted.

Hydro will also give you the ability to fold up the wings if needed.

RE: Re: RE: Rear Mount PTO Have you thought about a hydraulic PTO running from a pump either from the PTO on the trans or from a pump on the motor. Sure about the 540 RPM on the batwing and not 1000 RPM?

RE: This can Too green to have gome out with the oil. Pull your dip stick and see if the oil is white. Might be a simple fix.

I have your tires here waiting for you to pick up. One is new. !6.00 Goodyear on HEMMT lockring rims.

Here are some pic's of my ammo can holders.

Better jump or you will be paying more $$$ if you can find them, that’s where I got my plates. I will post a pic tomorrow of my ammo can trays. They have some wire type latches that hold the cans.

6.2, NV4500, 4.56, 11.00 16's, what type of milage does it get?

Well at the time I posted I did not have time to surf and look it up and no “PARTS” book at work. I knew that when I had time to check the site again someone would have posted and given me an answer and I could make a decision. I needed to know because I could pickup two tailgates that were in...

Are the deuce and the 5 ton tailgated the sae size?