• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Search results

  1. ida34

    GL and the sf97

    I know of a guy that bought an old collectors car form a respected member of the nationwide club for that vehicle. When he got it he did not verify the vin against the vin on the title. A few years later the Michigan Secretary of State somehow noticed the VIN did not work out right for the car...
  2. ida34

    GL and the sf97

    Someone else talked about the bond route in an earlier post but I am to lazy to check to see who. That being said in Michigan if the title is lost and the vehicle is worth over $2500 ( not sure of amount but in the ballpark) you can get an inspection by a police officer then can get your title...
  3. ida34

    Pulling a gooseneck trailer with a Deuce

    I was wondering about setting up a brake controller. I have an older brake controler that taps the hydralic line but I wonder if the electical load would overpower my 15 amp 24v to 12v converter. I was going to check the load then if it was going to max out the converter I figure I would just...
  4. ida34

    another authentic touch

    All our vehicles in the late 80's early 90's had driver on driver's side and the vehicle commander (section Sgt) was stenciled on the passengers side.
  5. ida34

    Big changes in DRMO system

    Go slow on the police accusations please. This may be the case in your area but I am in law enforcement and to the best of my knowledge my department has never taken anything from the system. My old department got two cucv ambulances that they used for swat trucks (most of swat entrys are drug...
  6. ida34

    M35 Winch, Radiator, other military vehicles/parts for sale

    Armada, PM sent. Chuck
  7. ida34

    M35 Winch, Radiator, other military vehicles/parts for sale

    Eric, Pmed you and sent you email. I would like the winch and some tire and wheels. Thanks Chuck
  8. ida34

    Any One have some tow shackles??

    Do you happen to have some front shackles for the M35? If so pm me. Thanks Chuck
  9. ida34

    Help with turn signals.

    And they are the plastic lights. Thanks Chuck
  10. ida34

    accepatable fluid substitutions

    Yes that is what I was talking about. I got mine from either Sam's Club or Walmart. I can't remember which.
  11. ida34

    Help with turn signals.

    That makes alot of sense. I thought they grounded through the wiring since it had three connections but it it now obvious that the 3rd wire is for the b/o cat eyes. It acts exactly like a bad ground. I should have thought of this myself. I had planned to get out a test light first and check all...
  12. ida34

    Help with turn signals.

    I noticed that when my hazard flashers are on the back lights alternate and it looks like the bright bulb is not working in any position. Dim light comes on when using the turn signal to the right and when the parking and running lights are on. I have not been able to check to see if the brake...
  13. ida34

    Where and how did you mount your license plates??

    Most all states that require the plate to be displayed will have a law that states it needs to be perminantly attached to vehicle in a horizontal position. I am a LEO and if the bailing wire is used it does not meet the law if it flaps in the wind. When you get going the plate flies up so it can...
  14. ida34

    accepatable fluid substitutions

    I forgot the actual rating or certification but I heard that if you get GL5 with a certain certification it would not mess with the brass in the trans and tranfer case. Anyone else know please speak up. I will try to find the rating but I thought it was something like MT or MP?
  15. ida34

    Will the winch from 813 5 ton work on m35a2 Deuce?

    The truck has jumped to over $900 and it does not run. To rich for me for a parts truck.
  16. ida34

    Will the winch from 813 5 ton work on m35a2 Deuce?

    First off, I know anything will fit with enough weld and plate steel. That being said, will the winch off an 813 5 ton bolt on to the M35a2? Is the 813 a pto winch also? If so, will the PTO fit the m35 trans? I would expect the driveshaft is longer and would I would need a shaft from an M35. Is...
  17. ida34

    Hazard Lights

    Pull out on the small part of the signal lever that is ribbed. It locks the lever to keep it from going to hazard instead of right turn in normal use.
  18. ida34

    How to quiet down the deuce cab...

    I have heard about using spray on bedliner inside the cab of trucks and jeeps to provide a long lasting surface that also drops noise level in the cab. I also use my aircraft intercom and headsets to have conversations in my truck.
  19. ida34

    Why an M275A2, why?

    I feel your pain Armada.
  20. ida34

    Tow bar

    My deal for my bar is going slow and may stop. I already have adaptors. I may be interested in a bar with no adaptors if they are not all spoken for. Chuck
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks