Search results

Nice Willie! You snagged a nice H1 last year and it is good to see what you did to it and now enjoying it!

Maybe. I would go with that combo. Eproms are cheap so changing them is easy if you want to switch it up.

Hi Chris, In your last post that is what I built. You would be very happy with that setup, it is just not a Cummins! Don't forget the tcm eprom version specifically made for each year of the 4L80E. 5962 01 431 5121 7X677 16244697 MICROCIRCUIT,LINEAR USE WITH 1996 TRANSMISSION ONLY 5962...

Welcome to the HMMWV Forum Chris! lol I look foward to your build! What voltage will you run? What top will you install? Inquiring minds want to know!

Have you used a fuel additive lubricant, like Stanadyne, to keep the ip's lubed when using ultra low sulpher fuel. Also, check the fuel return lines for fuel/blockage.

HI Augi, Welcome to the site and you have a good looking original M998. It looks nice and clean. Bite the bullet and buy a new KDS controller (either green label or yellow with yellow gpc). Then replace all glow plugs with new regulated non swelling (do not by kashcar ones for they do break)...

I will be there come heck or high work load! Joel, we can convoy together. Andrew, I hear your duece has a nice fresh paint job!

I just found out that I cannot make this meeting and I am sorry that I cannot attend. I was looking forward to getting there and seeing everyone in person and not on boobtube. Chuck, if we can find someone from my area going, I am more than happy to tranfer over the items you want.

Welcome from Lansing MI! The M101 3/4t trailer lunett will fit all WWII jeeps and WC's and M series smaller trucks (m37) and jeeps/mutts including hmmwv's/cucv's/880's etc. Big trucks are, well, bigger. It is a standard size but I have never measured it. Fitting should be snug but not tight.

No worries 3dAngus. Your tcase picture is a 218. Look at two things: output shaft requires a ujoint shaft and the case has the markings of a 218 (look at area on top front of case: smooth without ribs). A 242 output is a splin shaft with slip yoke. A 242 will work in a civi H1 for that is...

See picture: top one is a 218 taken out of a M998 hmmwv, and the bottom one is a 242 that was put in as a replacement. I've worked on both and the OP picture is a 218.

That is a NP218 transfer case in the picture. It was used on the first series hmmwv's and I believe the 92-93 H1's. The later series use the NP242. You will need to change your rear propellor and the rear half of the front propellor. I would not use it since it is a weaker transfer case than...

I have seen a Norwegian return WC63 that had a roll up winter grill cover that was behind the grill, before the radiator. It looked and acted like a spring loaded window blind only it was mounted at the bottom and the cover was pulled up to block the cold air. It was controlled by the driver...

A military hmmwv 6.5TD does not rely on a computer. It is mechanical. The 4L80E uses a TCM. I find it funny that you are concerned about fuel mileage with an mv! lol For a standard 6.2 in a hmmwv, make sure you have the rubber boot on the air filter box intake side. It is the one used for...

Here is my 406 with dozer blade, 3-way tipper bed and backhoe. Ex-German military truck. Awesome farm truck.

For us hmmwv guys, it is a no no to mix 8 bolt rims and radial tires. I get many hmmwv's in with this mix and I change them asap. Remember, they were changed for a reason!

Eric, give me a heads up of about 2 months and the meeting can be at my place (home or business). Have a great meeting before the storm starts. Have fun!

HI Lane, Unfortunately, I cannot make it. Is the first item on the agenda signs! lol Looking forward to the first year of the MIMVPA!

Click here: https://www.steelsoldiers.com/showthread.php?13063-hmmwv-a2-project.html My last couple of builds are on another good mv site (gee, I wonder what I mean) including my M1038 project.

He is having his very nice truck painted in that sceme AND yes, he could have worded his post better! I sent him a picture of hopefully what he is after.