Search results

http://lmgtfy.com/?q=Statler+or+Waldorf BWAAAAAAhahahahahahahaha

Not all IP's have an FDC. You have to know what pump you have.

Did you try looking for an extra deep spark plug socket?

Visiting our lovely St Augustine, our we?

Maybe we'll get a pic of an M915A2 on a stepdeck in the "MV SPOTTED" thread.

Should be: Champion Diesel Glow Plug Stock Number 182, Type CH42. I can sell you as many glow plugs as you want, but they don't come with the crush washers, and I don't have any.

Not a direct bolt in. Yes, with some drilling, and or welding. Yes I've done it. If you don't want to drill new holes in your floor(which I did not want) you have to weld on some tabs on the seat base to pick up the existing floor holes. Same reason too, "happy wife, happy life".

Sent you a PM Floridianson.

Deleted, I double posted somehow.

So you guys don't bend them down and up like the TM specifies? :confused:

The procedure for the Carrier based A/C we build is 300 ft lbs, back off to 0 lbs, then 15 in lbs. But that that has nothing to do with this vehicle either. Just saying The TM specifies 50 ft. lb. for the INNER NUT, before backing off 1/16 to 1/4 turn. Then tighten the OUTER NUT to 100 - 200 ft...

Ooh, 3600 miles in July. M915A2's don't have A/C, do they.

I'm using the O'reilly's 6TL's. No complaints, almost a year now. They also have the exact same US Commerce, not for export decal on top

Very nice. What paint did you use?

I say yes to any hose if you don't know how old it is. Multiple threads on both. Here's one link for the IP fuel feed hose. This hose comes from the primary fuel filter, connects to the copper crossover line under front frame rail: http://www.eriksmilitarysurplus.com/fuliasform3s.html The...

I'm in for one please.

Ooh, I wanna play Just a few: 1.) In San Jose and Sunnyvale it is illegal for grocery stores to provide plastic bags. 2.) You may only throw a Frisbee at the beach in Los Angeles County, CA with the lifeguard’s permission. 3.) In Dana Point, you may not use your own bathroom if the window is...

For putting a flare on the end of a tube.

Immersion time should most likely only be in the 1-3 minute range. If you can find these MIL specs, take a look at them. MIL-C-5541- Chemical film application for Al, and AL alloys, and MIL-DTL-81706, CHEMICAL CONVERSION MATERIALS FOR COATING ALUMINUM AND ALUMINUM ALLOYS If your using a non...

No wiping after rinsing. Air dry. Generally use phosphoric acid to clean. Water break test, no water beading up, sheeting off only. Ten minutes is a little long. What grade of Alodine? When you say "bare" do you mean bare, as in not Clad? Like 2024B, 7075B, etc. With these Alodining is for the...