Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
My question is, Are you getting 12v anywhere on the truck, or just 24v everywhere?
Check to see if the diagrams you are using are the same as the diagrams from the TM
The first one is the starting circuit, the second one is one I made from the two cab circuits. Having one page is easier than...
Its not too hard to do, really. If you don't have a metal fish tape, I would tie a shoestring to the old connector and pull the new one in with it after you pull the old one through. Lining up the connector long ways parallel to the shaft makes it easier to slip through.
Check and tighten the...
Just from a look at the wiring diagram, it looks like if you plug it into the yel-508 wire at the original wiring, it should at least trigger the water in fuel light. There is a tan wire and a white wire, but it looks like the yellow is on the ground side? I don't know what goes on electrically...
When I do my driver side I'll take pics. Drilling the right rivets out so there is room to put the new rivets in was probably the biggest pain aside from setting the new rivets. I taped a piece of cardboard over the glass as I was whacking the rivets in case I hit the glass.
I took about five hours Saturday and took apart the passenger door to replace the door glass window seals and the vent window glass seals. The door skin at the side mirror mount was bent inward making the bolt end hit the window glass bottom metal channel. I bent that back outward and suddenly i...
Mine drops into second at about 1mph and hits third right about 15mph. Ive been meaning to adjust it, but I want to do it at the same time as I replace the vacuum hoses.
I changed out my front stabilizer bar bushings with some Moog ones I got off of Rockauto.
Getting them off was pretty straightforward except for the top bolt on the passenger side. I ended up using a wobble joint and a wobble one inch extension on the socket so it would fit behind the brake...
I just put in a Napa radiator in my 1028 last weekend. The Napa part number was NR 2098. https://www.napaonline.com/en/p/NRS2098
The radiator pictured is not what you will get. What they are selling now is a 'Spectra Premium' radiator CU850 with aluminum core and plastic tanks, with a Napa...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.