-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Search results
-
C
FMTV ABS Connectors Rot
Most of my ABS connectors are bad like this: Does anyone have the same problem ? My research so far led me to the connector specs: Kostal socket M 24 x 1 3-pin However this does not seems to be a field crimp connector and I will have to use something like this to redo: If anyone have made... -
C
CTIS PCU Deflate Solenoid - Connector Unplugged; faulty wiring or solenoid
My CTIS is not inflating the tires so I went to check with the computer and I found PCU Deflate Solenoid - Connector Unplugged ; Fault Wiring or Solenoid. Does anybody knows if there is a CTIS troubleshooting guide or have seen this before ? I'm suspecting that my ABS light is related to this. -
C
FMTV LMTV Alternative Alternator 250Amps Direct Mount
Alternator upgrade is up and running. No need for expensive bracket fabrication. Mount straight to the engine Pad. Standing on the shoulders of giants like @GeneralDisorder , @MatthewWBailey , Acropper, @Ronmar I've completed my Alternator Upgrade. I have used info from this thread... -
C
FMTV A1 - Relay that Identifies Engine is Running
I'm trying to connect a battery to battery charger to my M1083A1, the device has an ACC/Enable port. I'm trying to identify a place I could connect it so it would only enable when the truck engine is running so it would use the alternator and not discharge the batteries. Does anybody knows if... -
C
Switch Next to Diagnostics Port
I looked over the A1 operators manual and could not find. What's the Red switch next to the steering column. I noticed it cuts of ignition and I'm assuming it's the battery cuttoff switch as I could hear a relay click when I switched it. Is that a battery cut off switch ? Any light on what... -
C
NJ FMTV 5-ton MTV 1083
Hagerty was a hassle, took several days and denied the policy when I mentioned I was going to convert it into an overland vehicle, they also wanted the truck inside storage. Called Progressive Commercial and got the policy over the phone in 30 minutes. Not for hire, not for personal... -
C
A1 Cat 3126 Air Intake Specs
I'm trying to get accurate air Intake Specs for the Cat 3126 of a 1999 M1083A1 so I could convert it to Donaldson air filters. I'm hard headed and don't want to just copy what others did without ensuring proper specs. I've been trying to find this engine intake CFM specs and so far I could...