Search results

Thinking about sanding for some paint. What grit to start with ? Did some sanding to look for Unit numbers and it seemed to go very slow. Ideas ? Thanks

Think I will use the Clippard GTV valves. http://www.clippard.com/cms/wiki/clippard-gvgtv-series-high-flow-poppet-valves

Any long time running reports ? Think its time to go manual. My CTIS is all over the place,works,doesn't work. pain.

Thanks !

Just a question. If I fill the tires to 80 psi won't the ctis do a test and bring it back down to 55 psi ?

Bath window in a sealed.

Walls are in and the side door is sealed and reinstalled. All welded and bolted in. What a PITA. I love 3M 5200 and hate it also. The truck could leak , but it won't be the door. LOL

Thanks for stopping by Allen. Working on the water line system. Looks like it will work .

Almost walls ? Riv-nut's at roof and bolt through at floor into steel cross member.

Over 10 years = display only. Under 5 years = 60mph +- imo. 2018 = new= 65-70 mph imo

Don't forget we have the "tire" issue also. Newer tires = +mph. Older tires = -mph.

Allen,stop over any time !

How strong is the printed part ?

A little more work on the bath. And got some more parts. And after looking out the back door think I may keep the roll up door and build a porch ?

Back to work on the bath. Reinstalled the side door with a inside support that has rev-nuts to hold the door frame. This is 1 1/2" x 1 1/2" steel tubing will be the inside wall tie point also. I try to have anything that I am building doing not less than 2 jobs. So we have a wall and the outside...

Pointman,some photos ? Thinking about going that way .

spankybear,do you have any photos of your set up ?

When you come over you can take a look at mine . You the "MAN".

Not sure if I will make it. Are all of you going to park together ?

If you go my way you will need to do some fitting. If you go with theirs its a no-brainier .