Search results

do a search, there is a posting for the NAPA impact socket that handles both the lug and Bud nut. It runs about $35.00 but is worth it

whats the problem? I have a steice if that will help. PM me

This set up is designed to leave the stock housing in place and the adapter screwes on to use a spin on filter. The canister filter can be put back on easily.

John Tennis is making an adapter that screws into the existing primary fuel filter housing that will allow the installation of the NAPA part# 3405 spin on style filter. NAPA gasket # 5070 is also needed to be installed between the adapter and the stock housing. The unit is machined from round...

EARL GIVE IT A REST! We have already heard all about your mirrors. It was your choice not to insure the package. I have known Bernie for years and have not had any problems. If you do not want to deal with him thats your decision. I do not buy Ford products any more but I am not going to...

I removed the old seal today the part number on it as A-1201-U-515 is this a good number fro crossreferencing the correct seal?

Thanks guys for the quick responses! Anyone have the part number for the seal ?I will evaluate replacing the seal without removing the housing first

My front differential seal is leaking, the seal (part# 18 on figure 79 20p) is on the front side of the differential on the front axle. The oil is getting slung by the companion flange dirt deflector and further sprayed by the fan and spraying oil every where. Has anyone changed this seal...

Let me know hod to get them in the easy way. thanks

Has anyone addressed changing the other water/coolant hoses on the Deuce multi-fuel? In addition to the upper and lower radiator hoses there are a couple of short hoses on the right side of the engine that are short straight rubber near the manifold. I havent seen these for sale. Any ideas?

air tool oil

be careful, refer to the 10 series (operators) manual prior to using your winch. You will do more damage to your truck if you do not perform the PM on the filters, fluids, grease, axle boots, bearings and brakes since these trucks usually sit for some time before we get them back on the road

if you want/need to rebuild your air pack the instructions are contained in TM 9-2320-209-34-2-1section 3 Hydraulic brake system. First I would lubricate the air pack by removing the plug on the rear of the airpack and squirt a few drops and replace the plug.

I arrived at Marksgarage2's place around 9am. We removed the old steering box without removing the radiator or sliding the engine to the right. Yes, it can be done thanks Gene! Pictures of the trashed steering box innards and the proccedure to follow thanks again Mark for your help.

Kenny, the next time I go to Murry's I can look in his yard and get some numbers and manucacturers from the trucks in the bone yard

My Deuce is about an hour away from my house with the bad steering box. I will be going up there with a replacement and need the sizes of the following bolts. The manual calls for removing the radiator and disconnecting the motor mounts. What size bolts hold the motor to the frame and the...

Thanks for the pictures Mark! Too bad you cant see the smile on my face because of the glare on the windshield!

I do not have pictures of the tow bar mounting but maybe one of the other guys on the trip has a shot taken as we all were working on the steering box. It is a home design. I used solid steel round stock. I drilled 3 holes in the top of the bumper to allow the round stock to be welded to the...

Thanks for the reply. I picked up a take off replacement from Murray's and will remove the old studs that held it to the frame and clean it up as required. I hope to be at Marks this weekend.

Bjorn, the only trouble I had was about an hour before the wheel stiffened up alot and we noticed the steering column had moved at the dash connection. We loosened the clamp and slid the column back to the paint line and it was back to normal. The real problem surfaced when the box gave out...