Search results

I just read a thread about changing the air brake switch on the air pack, and how there are bleed ports that allow the hydraulic fluid or the air pressure to alleviate once the pedal pressure is released. So I am thinking there may be a restriction in one of these ports by which applied brake...

Today I commenced brake adjustment procedures for my M35A2, I made platforms for my jack stands using 2X8's screwed side by side, so that the jack stands don't sink in the dirt. Using a 12 ton bottle jack for the front axle was rather straight forward, but attempting the rear axles jacked up is...

having carefully diagnosed a defective flasher for my M35, I installed new new one: polished the ground wire connection and all the mounting fasteners for the good ground It needs...screw in flash plug, screw in directional control plug ( also new) , power switch to right, one click turn...

Are there any SS vendors near Loxahatchee, Florida, 33470 who can install my air locker in the front axle?

Here are other inverted flare configurations by Parker-Hannifin

The 1/2" inverted flare nuts are made by PARKER-HANNAFIN, part # 41IFS-8

I hope he is OK too, especially since he has my money! Do you know where he is?

Installed new direction control assembly , directionals work on the first use of the control, but not on the second. troubleshooted according to the manual TM9-2320-209-20-2-1 page 25-214 and diagnosis is turn signal flasher .shall order new turn signal flasher.

Has anyone heard from Ken lately? I paid him $550 up front and he disappeared? He is not answering my e-mails. What's going on?

Hello markmontana, and I sent money to Ken as part of this group purchase and never heard from him in all this time! Did you ever get your order? Do you know how to reach ken? Plerase help me. Peter Mark WHATADEUCE

Hello daveks63, I was supposed to get a hh as part of thgeis group purchase , and paid for it up front, but have not heard from kennysken@wi.rr.com from Ken in all this time. Did you ever get your items? Do you know howe to reach this guy? Peter Mark WHATADEUCE

Got a permit to construct a new over culvert pipe entranceway onto my property. My deuce can handle the depth of the drainage ditch, but eventually will erode the ditch. I like to think of it as a tank trap!

Thank You COLDWARRIER, And it is certainly a lesson learned...

Hood flew open at 40 MPH , the center latch was bent and not catching consistently, which I ignored, and I forgot to fasten the two side hold down devices. The hood is bent but closes sufficiently. I ordered two new side fasteners and will repair the center latch.

Today I checked further for no brake lights using TM9-2320-209-20-2 and found the directional control unit to be defective. Replacement shall be ordered Monday

Installed new flasher on my M35A2, now the directional work only the first turn, but then it doesn't flash. Cleaned thre ground connector, fender contact area and washer surfaces bright and no difference...

Adjusted the fan belts. Mounted a chock on the area above the spare tire equipment. Located the switch mounted on the hydraulic brake cylinder that I believe is the reason I have no brake lights; but after seeing it I shall check the other connections as suggested in TM9-2320-209-20-2-1 page 25-120

Installed NOS passenger seat, added Lucas fuel stabilizer to my engine.

Moved my M35 to my new location and cleaned the cab.

Thank you all for this thread