Search results

I will go look at my 78 today to confirm, as I believe the pictured unit is 78 or newer standard rotation. The 75-77 set up uses a reverse rotation steering box. To make the pictured ps unit work you would also need the drag link & the steering column also.

since M880's didn't have power steering, probably not. Is it a picture of one that is for sale or one you have? If it's one you have, if it bolts up & turns the right way, it is the correct one. Too hard to tell anything from the picture provided

pm me your email to keep info out of prying eyes on the www

'cause that's just what they did at the factory. I have a 3/4 ton 8 lug 10 bolt front that had 6 lug hubs put on to use 6 lug wheels, the 14bolt semi floater rear, that took a lathe & a mill for that 8 to 6 lug conversion.

It takes air, fuel & spark to fire. Replacing parts before determining which one is missing isn't very efficient. for me the hot start issue has been you need to give it a little peddle (fuel) to fire it up.

Yep the owners are on the front lines of this issue, the rest of us MV owners need to get behind them!

I am getting reports here in Michigan that the Secretary of State is canceling registrations and recalling titles for some later model MVs, if title not returned within 15 days of notice to be changed to ORV title, the title will be canceled. It appears they are going after cetain MVs by way...

Donations are needed to take this event over the top. visit http://www.operationlzmichigan.org/ to see how you can help.

The station wagon thing was quite common when title was obtained without a SF97. I have also seen them titled as Jeep pickups with a 5700lb weight, as that was the heaviest Jeep listed in the SOS files.

direct fit, pitman arm stays with steering box. ( manual & power are different) replacement pitman arms for the power steering boxes are not available, so make sure the box you get still has it. Armstrong steering......

I have used add-a-leafs in many many trucks over many many years. They do pick the front end up 1 to 2 inches. That being said I have never heard or seen anyone refer to them as aal's Haven't used the ORD shackle kit, Gonna have to assume you are talking about the 2" longer shackles. Those will...

Here are two screen shots from the -10 operators manual that is on the site.

Oscoda, Michigan 8-10 July 2016 at the former Wurtsmith AFB, on site of the Wurtsmith Air Museum. All MV's welcome, on site primitive camping. Check it out! pass it along! Just announced! One of the MV owners attending with a MV will win a flight in the Huey! Flyer below...

see post #19 http://www.steelsoldiers.com/showthread.php?45336-Hummvee-tires-lift-kits&highlight=m887

You could mount a trailer tag holder under the bumper

Seems to me a factory installed auxiliary trans cooler is before the radiator. Every aftermarket cooler I have bought came with instructions that say to place it before the radiator. If you have a 210° thermostat, the coolant mixture entering the radiator will be near 210°, the temperature at...

I don't see the trans causing the cooling system to overheat, if the tranny was putting out that much heat it would fail quickly.

8 lugs on a 6.5" bolt cicle center hole 4-7/8" ( a 4-3/4 center hole Chevy wheel won't fit the Dodge D60 rear axle)

just your average MSP trooper. Minimal knowledge of the laws, don't care to learn them either. Only mission is to issue citations to bring in money. Yes, there is a limit on bumper & frame height for vehicles with less than a 10,000 lb gvwr Stacks on a pickup are not illegal here. Exhaust must...

I have used F250 wheels (pre-superduty) IIRC they are a little wider than the 6" wide Dodge van wheels.