Search results

top of the grill, leading edge of closed hood

Been running 36" Humvee tires for over 8 years on this truck. Been running 285/75-16's, plowin' & wood haulin' for years with this one. I've had M880's around for over a dozen years & have never had a wheel bearing failure on the D44 fronts. or any other axle component failure. Now I have...

http://www.steelsoldiers.com/showthread.php?78294-Lansing-area-monthly-meet-and-eat

Warm up in neutral for 30 to 60 seconds. The 727 trans does not pump fluid in park.

Pictures & lighting two pics below same camera, same freshly painted truck, same day, same 34079 paint as the ambulance.

some 34079 from the factory

10 years ago freshly painted 7 years ago, Only time in the mud, did quite well. 4 or 5 years ago last year

I believe they can be removed & reused. With a fender off, you could work around the inside edge with a chisel, or use a small diameter punch & pop them thru, and the re hammer them tight in the new fender. pic of the type of rivet they are, or do a little measuring & source out some...

"I then went to bleed the front brakes and couldn't get any pressure built up, even with the truck running and pumping the pedal with the bleeders open." Not gonna work that way.

Hmm, I'll have to check the parts trucks when it gets light out again. I believe they are metallic.

My '77 M880

The only specific in the historical plate rules is " A vehicle registered with a historical or authentic plate cannot be used for routine, day-to-day transportation." The plate law this thread is about has nothing to do with the Historic Plate use regulations. 74M35A2 any type of...

Walker used to have a listing for it. but like was just said, have an exhaust shop make it. I know that there is one of those pipes somewhere around here, but it's buried somewhere. I've used all NOS pipes before. I spent less than $200 at a shop for the whole exhaust on one of mine. All...

It's early but mark those calendars for 8, 9 & 10 July 2016

Toe in toe out no matter death wobble is a result of something being loose or worn. Silly low miles on a 30 year old truck doesn't matter, something (or multiple somethings) is loose or worn. You mentioned just the right front tire jumping, any DW I've ever encountered shakes both tires, check...

U haul will not rent it to you if you tell them what your plans (really) are. I also don't think they will allow you to tow it with anything less than a 3/4 ton truck. Got a 'Plan B'?

I know a guy looking for the Chevy set here in Michigan Chris Causley at http://www.mimths.org/ I made a drawing for fabing the M880 ones

One of the wires on the coil is the power from the ignition and the other goes to the distributor. Never messed with a Pertronix, but it sounds like you removed your power wire. The vacuum advance is in a different position????? then your timing is also off.

Thanks for sharing. Nice find!