Search results

there is a port by the oil filters that i guess was used to take oil samples from. This also can be used to drain the filters. when i changed my oil, i stuck my finger down inside where the oil filters go and there was some sludgy stuff in there. nothing real bad, but it may be worth trying to...

ugh. bummer man. sorry to hear it. hope to get my truck ready soon. its getting there slowly but surely! my status on comming has gone from "maybe" to "definately comming":)

I know this is an old thread, butmy steering box is getting a little loose. The bushings on the pitman arm shaft have some play in them and the box is allready adjusted with the adjustment screw. I did a search to see if anybody had some pictures of how it all goes together and changing the...

so are any of the LD/LDT-465 IP's oiled in this fashon? I looked a little bit in the TM and didnt see anything. All of the IP's have a little different specs, so i ofted wondered what was the best IP they put on the multifuels. you know, some have droop screws (which i think was only...

I would like to come down, so its a "maybe" for me. I would like to get some work done on my M35A2 before i go though. I never packed my wheel bearings and am thinking it might be a good idea to do. i never had it in water, but it would make me feel better if i had the bearings packed. So this...

humm... what is better lubed or not? common sence would say any mechanical part lubed is a good thing. i have a general idea how the IPs work and know the fuel needs to have lubrication propertys, but does that have anything to do with this lubed and not lubed IPs that you speak of?

i think the M50A2 water tanker holds 1000 gallons.... the M49A2 fuel tanker i think may have been a little more at 1200 gallons.

i like the idea of heating the barrel just my one concern is that would that cause convection in the barrel and stir up the crud in the bottom? i dont know how "hard packed" the sludge would be in the bottom. again just a thought. how many watt are the band heaters and where would i get one? my...

Well I got my WMO system in production last night. still need to make brackets to mount the filters on the drum, but thats just a cosmetic thing more than anything. i have 4 filtering stages, where first stage is a 60 mesh pickup screen then a (using Zinga filters) SE-25, then SE-10, then an...

what are you using for the line for the injector return lines? i see a threaded fitting there. Im not that fimiliar with the flex loc hose.

you could have the machine gunner shoot and the camel spittin! long range or close range, you're covered!

First off welcome to Steel Soldiers and happy new deuce! Did you use the search function at all? There is a thread where you can find your vehicle history.

do you hear any sounds like the air pack is working (air pressure releasing)? what is your air pressure like? Im sure its going to be hard with no air in the truck.

how strong are those lockout hubs though. seems like the stock shaft has been time proven. i would get nervous that when loaded with 6 ton of stuff in the back and that locked in that it wouldnt be able to take the torque going around a turn (having both axles hooked together). I dont have proof...

what made you change the wheel cylinder? what previous problems were there?

all the suggestions these guys have said are great and its good to check what they said too. you could put a fuel gauge on the bleeder port of the final fuel filters with a long hose so you can see it in the cab. drive it down the road and see when it cuts out if you lose pressure going to the...

"got gas in it?"~from the movie "slingblade"

Well the parade was a great time! Following the retired marines marching, i drove the deuce with some friends in the back. Well it was so much fun that we picked up some people along the parade route too. Some college girls even wanted to join the fun, so they jumped in the back and in the cab...

Thats the problem right there, "married". single at 26 years old here.... i rest my case! Marrage is the #1 cause of divorce, just remember that boys and girls!:wink:

agreed. it just looks like it wants to hump on some beat up toyota pickup in the middle east. i look at the other 920's and his just looks awesome. i hold up the jealous flag!:-D