Search results

You could go with a 24 to 12 converter or if it is just lights you are looking for you could go with LEDs that will run from 10 to 30 volts. I am installing some backup lights on my HMMWV and I have a pic of the lights below. Mark Model:18W Voltage：DC 10V-30VWaterproof：IP67 Color...

You sure it is not gear oil mixed with ATF? I had this happen and it turned out to be the dreaded Vampire leak. The cooler in the transfer case develops a leak so the tranny pumps ATF into the transfer case and then out the breather lines to the pumpkins and Portal hubs and onto the air cleaner...

I went with a waterproof 60amp 24 to 12 converter and mounted it in the engine compartment. Simple setup and works very well. Mark...

I went with a new Bradley Robotool kit with all the accessories. Spent more than I would like but it comes with everything under the sun. Mark

I will be there on Saturday for the day and am bringing my M998. My buddy is taking his Pinz 712M out of the tabernacle for the show. This rig does not come out often. If you want to see one of the nicest 712Ms in the country please check her out. See you there. Mark

Great info, thank you very much. Mark

The tailgate would be down but the big question is will it fit between the bed fenders. Mark

I know it is close but I wonder if it would fit. Came across a nice mule and it got me thinking. Thanks for the help. Mark

I used the military small D Rings in my M101A2 in the four corners and it worked great. Single bolt setup and use a good washer on the underside of the bed. Very strong and just one hole per ring. Mark http://armysurpluswarehouse.com/military-issue-vehicle-cargo-tie-down/ TIE DOWN -...

There is a temp switch in the pass head at the back of the block (coolant) and its function is to retard the timing at the injector pump until the temp is up a bit. Mine was bad and had the same problem and when replaced the problem was gone. Just a thought. Mark

The M101A2 works very well for a Pinz. Mark

LOL no I had the lights on there just to see what they would look like months ago but they are not staying on. Mark

Had a 40 ton shackle and a couple of grinding discs. Three hrs later...A bit overkill lol Mark

It has just a small amount of sheen as the flat paints tend to show dirt and oily hands a lot more. I think you would be very pleased with the mix. Regards, Mark

My M998 has the high back seats but the colors all differed from one another so I tried Rustoleum Fabric paint spray in black because they did not have a good green. Was very happy with the results and it the paint is wearing well. FYI: it takes just over one can per seat to give a good solid...

That looks like a hole. Not good. Looks like there is also a crack on the differential yoke.. Mark

The Clansman PRC 320 is a great rig and used all over Europe. It's an AM unit some with SSB. They run from 2Mhz to 30Mhz so it works really well with the Ham bands. You can also use the "MANPACK" backpack setup for this rig. My buddy has one we are going to setup in his Pinzgauer and I am going...

Mine is on the North Shore. Not many around MA. Mark

For a NA diesel keep the stall low and would look at 1200-1300 somewhere around there. With a turbo diesel I would go with a 1400 stall to give a tad more rpms to spool up the turbo. I really like the idea of a 700R4 and I happen to have a built one in a Mazda pickup and I may steal it for the...

Thanks :)